Difference between revisions of "FMB640 SMS/GPRS command list"
From Wiki Knowledge Base | Teltonika GPS
Line 121: | Line 121: | ||
! style="width: 500px; background: black; color: white;" | Description | ! style="width: 500px; background: black; color: white;" | Description | ||
! style="width: 50px; background: black; color: white;" | Response | ! style="width: 50px; background: black; color: white;" | Response | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
! style="text-align: left; vertical-align: top;" | ''[[FMB odoset|odoset]]:#'' | ! style="text-align: left; vertical-align: top;" | ''[[FMB odoset|odoset]]:#'' |
Revision as of 06:53, 29 May 2018
Main Page > EOL Products > FMB640 > FMB640 Manual > FMB640 SMS/GPRS command list
All commands are case sensitive. When user tries to send SMS/GPRS message to FMB640 that operates in Deep Sleep mode, it cannot arrive to FMB640 device because the GSM/GPRS module is disabled most of the time. FMB640 will receive the SMS/GPRS message when it exits Deep Sleep mode.
If FMB640 is in GPS Sleep or Online Deep Sleep mode, sent SMS/GPRS message will arrive to the device.
Common commands
Command | Description | Response |
---|---|---|
getstatus | Modem Status information. | Yes |
getcfgtime | Date and Time of last successful configuration | Yes |
getgps | Current GPS data and time | Yes |
getnmeainfo | Nmea error debug sms. | Yes |
cpureset | Reset CPU. | Yes |
resetallprof | Reset profile FLASH to default. | Yes |
getver | Device / Modem / Code version information. | Yes |
getinfo | Device runtime system information. | Yes |
deleterecords | Delete all records saved on FLASH. | Yes |
getio | Readout digital inputs and outputs, analog inputs. | Yes |
banlist | Banlist information. | Yes |
crashlog | Crash log information. | Yes |
delete_all_sms | Delete all read SMS. | Yes |
braminfo | BatRam info. | Yes |
getgnss | Current GNSS information. | Yes |
resetlimits | Resets data counters. | Yes |
readio # | Enable/disable static navigation. | Yes |
setdigout XXXX Y1 Y2 Y3 Y4 | Set digital output. 1. # – 0 or 1 (0 - OFF or 1 – ON) for DOUT1. 2. # – 0 or 1 (0 - OFF or 1 – ON) for DOUT2. 3. # – 0 or 1 (0 - OFF or 1 – ON) for DOUT3. 4. # – 0 or 1 (0 - OFF or 1 – ON) for DOUT4. Y1 – timeout value for DOUT1 if needed (in seconds). Y2 – timeout value for DOUT2 if needed (in seconds). Y3 – timeout value for DOUT3 if needed (in seconds). Y4 – timeout value for DOUT4 if needed (in seconds). |
Yes |
getparam # | Readout parameter value according entered ID. # - ID value. |
Yes |
setparam #:# | Sets selected parameter value. 1.# - first ID value. |
Yes |
setparam #:#;#:#;… | ||
flush #,#,#,#,#,#,# | Redirects device to other server. 1.# - IMEI. |
Yes |
Command | Description | Response |
---|---|---|
odoset:# | Set total odometer value. # - new odometer value in km. |
Yes |
odoget | Display current odometer value. | Yes |
Command | Description | Response |
---|---|---|
btgetlist # | Returns requested Bluetooth list. # - 0,1 or 2 (0 – Discovered, 1 – Paired, 2 – Connected). |
Yes |
btscan | Starts Bluetooth scan. | Yes |
btvisible # | Sets Bluetooth to visible with TMO. # - visibility TMO (from 1 to 255 seconds). |
Yes |
btrelease # | Disconnects from current device and pauses auto connect functionality for TMO. # - none or TMO (from 1 to 255 seconds). |
Yes |
btunpair # | Unpair Bluetooth device. # - all, BT address (all – unpair all devices, BT address – unpair only specified MAC address). |
Yes |
Command | Description | Response |
---|---|---|
lvcansetprog # | Set program number to LV-CAN200/ ALL-CAN300 that is connected to FMB1YX. # three digit number that identity vehicle. |
Yes |
lvcansimpletacho # | Add or remove simpletacho start byte. # - 0 or 1 (0 – don’t add start byte, 1 – add start byte). |
No |
lvcangetprog | Get program number from LV-CAN200/ ALL-CAN300 that is connected to FMB1YX. | Yes |
lvcangetinfo | Get information about connected LV-CAN200/ALL-CAN300. | Yes |
lvcanclear # | Clear Total Mileage (counted), Engine Work Time (counted), Fuel Consumed (counted) parameters values. # - parameter (0 – Engine work time (counted), 1 – Fuel Consumed (counted), 2 – Vehicle Mileage (counted)).. |
Yes |
allcanmode | Turn on ALL-CAN300 mode. | Yes |
lvcanmode | Turn on LV-CAN200 mode. | Yes |
lvcanfaultcodes | Read DTC fault codes. | Yes |