Difference between revisions of "FMB640 SMS/GPRS command list"
From Wiki Knowledge Base | Teltonika GPS
| Line 131: | Line 131: | ||
|- | |- | ||
|} | |} | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
Revision as of 06:55, 29 May 2018
Main Page > EOL Products > FMB640 > FMB640 Manual > FMB640 SMS/GPRS command list
All commands are case sensitive. When user tries to send SMS/GPRS message to FMB640 that operates in Deep Sleep mode, it cannot arrive to FMB640 device because the GSM/GPRS module is disabled most of the time. FMB640 will receive the SMS/GPRS message when it exits Deep Sleep mode.
If FMB640 is in GPS Sleep or Online Deep Sleep mode, sent SMS/GPRS message will arrive to the device.
Common commands
| Command | Description | Response |
|---|---|---|
| getstatus | Modem Status information. | Yes |
| getcfgtime | Date and Time of last successful configuration | Yes |
| getgps | Current GPS data and time | Yes |
| getnmeainfo | Nmea error debug sms. | Yes |
| cpureset | Reset CPU. | Yes |
| resetallprof | Reset profile FLASH to default. | Yes |
| getver | Device / Modem / Code version information. | Yes |
| getinfo | Device runtime system information. | Yes |
| deleterecords | Delete all records saved on FLASH. | Yes |
| getio | Readout digital inputs and outputs, analog inputs. | Yes |
| banlist | Banlist information. | Yes |
| crashlog | Crash log information. | Yes |
| delete_all_sms | Delete all read SMS. | Yes |
| braminfo | BatRam info. | Yes |
| getgnss | Current GNSS information. | Yes |
| resetlimits | Resets data counters. | Yes |
| readio # | Enable/disable static navigation. | Yes |
| setdigout XXXX Y1 Y2 Y3 Y4 | Set digital output. 1. # – 0 or 1 (0 - OFF or 1 – ON) for DOUT1. 2. # – 0 or 1 (0 - OFF or 1 – ON) for DOUT2. 3. # – 0 or 1 (0 - OFF or 1 – ON) for DOUT3. 4. # – 0 or 1 (0 - OFF or 1 – ON) for DOUT4. Y1 – timeout value for DOUT1 if needed (in seconds). Y2 – timeout value for DOUT2 if needed (in seconds). Y3 – timeout value for DOUT3 if needed (in seconds). Y4 – timeout value for DOUT4 if needed (in seconds). |
Yes |
| getparam # | Readout parameter value according entered ID. # - ID value. |
Yes |
| setparam #:# | Sets selected parameter value. 1.# - first ID value. |
Yes |
| setparam #:#;#:#;… | ||
| flush #,#,#,#,#,#,# | Redirects device to other server. 1.# - IMEI. |
Yes |
| Command | Description | Response |
|---|---|---|
| odoset:# | Set total odometer value. # - new odometer value in km. |
Yes |
| odoget | Display current odometer value. | Yes |
