Template:FMB964 SMS/GPRS command list

Common commands

Command	Description	Response
getinfo	Device runtime system information.	Yes
getver	Returns code version, device IMEI, modem app version, RTC time, Init time, Uptime and BT MAC address.	Yes
getstatus	Modem Status information.	Yes
getgps	Current GPS data, date and time.	Yes
getio	Readout analog input,digital input and output.	Yes
ggps	Returns location information with Google maps link.	Yes
readio #	Returns IO status, # AVL ID.	Yes
cpureset	Resets device.	No
fwstats	Get data about FW and restarts	Yes
getrecord	SMS command initiates saving and sending of high priority record	No
getimeiccid	Reponse is sent to SMS/GPRS sender and to number which is provided.	Yes
allver	Responds with information about hardware and firmware versions and storage space	Yes
getparam #	Returns selected parameter value, # param ID.	Yes
setparam #:#	Sets selected parameter value. 1.# - first ID value. 2.# - New first Parameter Value. 3.# - second ID value. 4.# - New second Parameter Value. 5.# - third ID value. 6.# - New third Parameter Value. SMS command is limited to 160 characters.	Yes
setparam #:#;#:#;…
flush #,#,#,#,#,#,#	Redirects device to other server. 1.# - IMEI. 2.# - APN. 3.# - LOGIN. 4.# - PASS. 5.# - IP. 6.# - PORT. 7.# - MODE (0-TCP/1-UDP).	Yes
countrecs	Returns records number.	Yes
deleterecords	Delete all records from SD card.	Yes
setdigout ## Y1 Y2	Set digital output. 1.# – 0 or 1 (0 - OFF or 1 – ON) for DOUT1. 2.# – 0 or 1 (0 - OFF or 1 – ON) for DOUT2. Y1 – timeout value for DOUT1 if needed (in seconds). Y2 – timeout value for DOUT2 if needed (in seconds).	Yes
battery	Returns battery state info.	Yes
wdlog	Returns all information about 'watch dogs' restarts.	Yes
defaultcfg	Load default configuration.	Yes
setkey # #	Add new or change current configuration keyword. If device is locked, keyword cannot be changed. 1.# - old keyword (if adding new keyword space). 2.# - new keyword.	Yes
delkey #	Remove existing keyword (If device is locked, keyword cannot be changed). 1.# - old keyword.	Yes
bbread #	Return black box information (HEX value of event ID and HEX value of custom data field (optional)). 1.# - returns entered number of latest events. When # is omitted the latest events are packed to single SMS.	Yes
bbinfo #	Return same information as bbread command but additional all events timestamp is written in HEX. 1.# - returns entered number of latest events. When # is omitted the latest events are packed to single SMS.	Yes
sdformat	Format SD card.	Yes

Commands related to Blue-tooth

Command	Description	Response
btgetlist #	Returns requested Blue-tooth list. # - 0,1 or 2 (0 – Discovered, 1 – Paired, 2 – Connected).	Yes
btscan	Starts Blue-tooth scan.	Yes
btvisible #	Sets Blue-tooth to visible with TMO. # - visibility TMO (from 1 to 255 seconds).	Yes
btrelease #	Disconnects from current device and pauses auto connect functionality for TMO. # - none or TMO (from 1 to 255 seconds).	Yes
btunpair #	Unpair Blue-tooth device. # - all, BT address (all – unpair all devices, BT address – unpair only specified MAC address).	Yes
#BT DAT= (Server->BT communication)	Forwards data, to connected device(Data Link mode only).	Yes
#SPP DAT= (Server->BT communication)	Forwards data, to connected device, no matter, client or server connection.	Yes

Commands related to OBD

Command	Description	Response
obdinfo	If connected with Blue-tooth OBD dongle displays all available information from OBD.	Yes
faultcodes	If connected with Blue-tooth OBD dongle display all visible fault codes.	Yes
cleardtc	Clears all vehicle stored fault codes.	No
getvin	Get vehicle VIN code, if OBD dongle is connected.	Yes

Commands related to features

Command	Description	Response
fc_reset	Resets fuel consumption parameters.	Yes
towingreact	Towing reactivation.	Yes
auto_calibrate:set	Calibrate position if car accelerate straight to > 30 km/h for 5 sec.	Yes
auto_calibrate:get	Returns the state of calibration.	Yes
odoset:#	Set total odometer value. # - new odometer value in km.	Yes
odoget	Display current odometer value.	Yes
on_demand_trackingX	X=0 – Stops Tracking on Demand functionality. X=1 – Starts Tracking on Demand functionality. X=2 – Generates one high priority record and inititates data sending to server.	Yes