Difference between revisions of "Template:FMB2 First start card"
From Wiki Knowledge Base | Teltonika GPS
Berankis.si (talk | contribs) |
|||
| Line 1: | Line 1: | ||
[[Image:Qsg_rut950_teltonika.PNG|centre]] | [[Image:Qsg_rut950_teltonika.PNG|centre]] | ||
| − | |||
| + | <b>{{{model|FMB20X}}} Small and professional waterproof tracker with high gain {{{GPS_antenna|internal}}} {{{antenna|GNSS/GSM antennas}}}, Blue-tooth and high capacity internal {{{battery|Ni-MH}}} battery</b>{{{pic|[[Image:FMB202.png|400px|right]]}}} | ||
| − | + | __TOC__ | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | =='''How to insert micro SIM card'''== | |
| − | ==Cable colors== | + | 1. Open {{{model|FMB20X}}} case using screwdriver. |
| + | |||
| + | 2. Remove {{{model|FMB20X}}} case. | ||
| + | |||
| + | 3. Insert SIM card as shown. | ||
| + | |||
| + | 4. Connect battery connector as shown. | ||
| + | |||
| + | 5. Attach case, and screw in the screws. | ||
| + | |||
| + | 6. Device is ready. | ||
| + | |||
| + | [[Image:case7.png|200px]][[Image:case4.png|200px]][[Image:case2.png|200px]] | ||
| + | [[Image:case5.png|200px]][[Image:case3.png|200px]][[Image:case6.png|200px]] | ||
| + | |||
| + | |||
| + | =='''Cable colors'''== | ||
{| class="wikitable" | {| class="wikitable" | ||
|+ | |+ | ||
Revision as of 10:46, 24 October 2018
FMB20X Small and professional waterproof tracker with high gain internal GNSS/GSM antennas, Blue-tooth and high capacity internal Ni-MH battery
How to insert micro SIM card
1. Open FMB20X case using screwdriver.
2. Remove FMB20X case.
3. Insert SIM card as shown.
4. Connect battery connector as shown.
5. Attach case, and screw in the screws.
6. Device is ready.
Cable colors
| Wire color | Pin name | Description |
|---|---|---|
| Red | VCC (10-30)V DC (+) | Power supply (+6...30 V DC). |
| Black | GND (-) | Ground. |
| Yellow | DIN 1 | Digital input, channel 1. |
| White/Green | DIN 2 | Digital input, channel 2. |
| White | DIN 3 | Digital input, channel 3. |
| Grey | AIN 1 | Analog input, channel 1. Input range: 0-30 V DC. |
| White/Orange | DOUT 1 | Digital output, channel 1. Open collector output. Max. 3,3 A DC. |
| Violet | DOUT 2 | Digital output, channel 2. Open collector output. Max. 3,3 A DC. |
| Green | 1WIRE DATA | Data channel for 1–Wire devices. |
| Blue | 1WIRE POWER | +3,8 V output for 1–Wire devices. |
