Teltonika Configurator versions

Here you can find Teltonika Configurator software release and latest versions.

Please select your device to find the correct version of Configurator:

• FMB900, FMB920
• FMB001, FMB010
• FMB110, FMB120, FMB122, FMB125
• FMB202, FMB204
• FMB962, FMB964
• FMB640
• FM3001
• FMT100
• TMT250
• FM3612, FM36M1
• FMB630, FM6300, FM6320

- Latest version candidate for release. This version will usually contain some new features and/or improvements but it hasn't been fully tested and approved by Teltonika's testing and technical support units.
- Release version which is used with current firmware release version: FMB firmware errata, FMB640 firmware errata, TMT250 firmware errata

For FMB series

---

Configurator suitable for: FMB900, FMB920, FMB001, FMB010, FMB110, FMB120, FMB122, FMB125, FMB202, FMB204, FMB962, FMB964, FM3001, FMT100

CONFIGURATOR VERSION	FIRMWARE VERSION	FILE FORMAT	DATE	LANGUAGE	CHANGES
0.17.9_C.008	<=03.18.16.Rev.00		2018.11.29	EN, RU	Changed default configurations parameters values Added labels with tooltips for DOUT states - ON and OFF Other minor improvements
0.17.9_C.002	<=03.18.15.Rev.00		2018.11.19	EN, RU	Fixed mistype in localization

For FMB640

---

Configurator suitable for: FMB640

CONFIGURATOR VERSION	FIRMWARE VERSION	FILE FORMAT	DATE	LANGUAGE	CHANGES
0.18.21_C.302	<=00.03.21		2019.02.01	EN, RU	Minor improvements Configuration saving improvements
0.17.9_C.301	<=00.03.08		2018.11.29	EN, RU	Restored records saving without time parameter
0.17.9_C.300	<=00.03.04		2018.11.19	EN, RU	Minor improvements

For TMT250

---

Configurator suitable for: TMT250

CONFIGURATOR VERSION	FIRMWARE VERSION	FILE FORMAT	DATE	LANGUAGE	CHANGES
0.16.1.17313_C.009	<=03.21.03.Rev.00		2018.10.25	EN, RU	Removed alarm feature 'enable' parameter because this feature is enabled, when button is configured for alarm scenario Added protection for no LED and Vibro scenario
0.16.1.17313_C.004	<=03.21.01.Rev.01		2018.10.22	EN, RU	Enabled BT 4.0 and its IO elements for TMT250 Increased max odometer value "Power on by USB" default value changed to 1