Difference between revisions of "Template:FMB0 First start card"
From Wiki Knowledge Base | Teltonika GPS
| Line 19: | Line 19: | ||
Device is ready to be connected. | Device is ready to be connected. | ||
| − | {{{insert1|[[Image: | + | {{{insert1|[[Image:Fmc001_cover_1.png|280px]]}}}{{{insert2|[[Image:Fmc001_cover_2.png|280px]]}}}{{{insert3|[[Image:Fmc001_battery_1.png|280px]]}}}{{{insert4|[[Image:Fmc0010_cover_3.png|280px]]}}} |
Revision as of 12:29, 13 September 2019
Advanced Plug and Track real-time tracking terminal with GNSS, GSM and Bluetooth connectivity
How to insert Micro-SIM card and connect battery
- Gently remove FMB1YX cover using plastic pry tool from both sides.
- Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
- Connect battery as shown to device. Position the battery in place where it does not obstruct other components.
- Attach device cover back.
Device is ready to be connected.
 |
Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it. |
How to insert SD card into FMB1YX
Insert SD card as shown.
NOTE: SD cards are only used in devices manufactured until 2018-04. Newer devices have internal flash memory.
