Template:FMB630 First start config: Difference between revisions

Revision as of 10:56, 22 January 2020

How to install FMB630 drivers (Windows)

1. Please download Virtual COM port drivers from Teltonika website: https://avl1.teltonika.lt/Downloads/FM11YX/vcpdriver_v1.3.1_setup.zip. 2. Extract and run vcpdriver_v1.3.1_setup.exe. This driver is used to detect FMB640 device when it is connected to the computer. 3. Click Next in driver installation window. 4. In the following window click Install button. 5. Setup will continue installing the driver and eventually the confirmation window will appear. Click Finish to complete the setup. You are now ready to use the device on your computer.

Configuration (Windows)


MS .NET requirements
Operating system	MS .NET Framework version	Version
Windows XP with SP3 or later	MS .NET Framework 3.5 or later	32 and 64 bit

At first FMB1YX device will have default factory settings set. These settings should be changed according to the user's needs.
Device can be configured to acquire and send data to server, in this case the GSM settings shall be set in regards with GSM operator's information. If device GSM is unavailable, the device will not be able to send the data and FMB1YX will start storing records to flash memory. It is possible to store up to 192000 data records with 128 MB SD memory card (when 100 MB are used to store records). It will send data over GPRS when it is available. Note that FMB1YX might reach its full memory capacity. If such case happens, the device will start deleting the oldest records in order to save new ones.
FMB1YX configuration is performed via FMB1YX Configurator program. Contact sales manager to get the latest FMB1YX Configurator version. FMB1YX configurator operates on Microsoft Windows OS and uses prerequisite MS .NET Framework.

Module configuration can be performed over USB cable. Configuration process begins by starting FMB1YX Configurator software and then connecting to FMB1YX device via Connect button located in Online header menu part. FMB1YX has one 4 editable profiles, whose can be loaded and saved to the device. After any modification of configuration the changes need to be saved to FMB1YX device using Save button.
Main buttons offer following functionality:

Load – loads configuration from device.
Save – saves configuration to device.
Load Defaults – loads default configuration. Requires additional click on save button to save default into device.
Load from file... – loads configuration from file.
Save to file... – saves configuration to file.
Reset device – restarts device.
Device info – shows status of some basic parameters.
Get Actual Profile – informs user about active profile.
Add Keyword/Change Keyword/ Switch Security Off – Create/Edit/Remove security key from device.

More details on using the Configurator can be found in the manual.

@@ Line 1: / Line 1: @@
-<font size="+3"><span style=color:#104996>'''How to install {{{model|FMB630}}} drivers (Windows)'''</span></font>
+=='''How to install {{{model|FMB630}}} drivers (Windows)'''==
-<font size="+2"><span style=color:#F49E21> 1. </span> Please download Virtual COM port drivers from Teltonika website: https://avl1.teltonika.lt/Downloads/FM11YX/vcpdriver_v1.3.1_setup.zip. </font>
+. Please download Virtual COM port drivers from Teltonika website: https://avl1.teltonika.lt/Downloads/FM11YX/vcpdriver_v1.3.1_setup.zip.
+. Extract and run <span style=color:#F6A83E>vcpdriver_v1.3.1_setup.exe</span>. This driver is used to detect {{{model|FMB640}}} device when it is connected to the computer.
+. Click <span style=color:#F6A83E>Next</span> in driver installation window.
+. In the following window click <span style=color:#F6A83E>Install</span> button.
+. Setup will continue installing the driver and eventually the confirmation window will appear. Click <span style=color:#F6A83E>Finish</span> to complete the setup. You are now ready to use the device on your computer.
-<font size="+2"><span style=color:#F49E21> 2. </span> Extract and run <span style=color:#F6A83E>vcpdriver_v1.3.1_setup.exe</span>. This driver is used to detect {{{model|FMB640}}} device when it is connected to the computer. </font>
+=='''Configuration (Windows)'''==
-<font size="+2"><span style=color:#F49E21> 3. </span> Click <span style=color:#F6A83E>Next</span> in driver installation window. </font>
+{| class="wikitable" style="width:50%;"
-<font size="+2"><span style=color:#F49E21> 4. </span> In the following window click <span style=color:#F6A83E>Install</span> button. </font>
-<font size="+2"><span style=color:#F49E21> 5. </span> Setup will continue installing the driver and eventually the confirmation window will appear. Click <span style=color:#F6A83E>Finish</span> to complete the setup. You are now ready to use the device on your computer. </font>
-<font size="+3"><span style=color:#104996>'''Configuration (Windows)'''</span></font><br/>
-<font size="+2"><span style=color:#104996>.NET requirements</span></font>
-{| class="wikitable"
 |+
-! style="background: white; color: #F6A83E;"         | Operating system
+! colspan="3" style="width:50%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"|MS .NET requirements
-| style="background: white; color: #F6A83E;"         | MS .NET Framework version
+|-
-| style="background: white; color: #F6A83E;"         | Version
+! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| Operating system
+! style="width:30%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| MS .NET Framework version
+! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| Version
 |-
-| style="text-align: left; background: #F6F6FB;" rowspan="2"         | Windows XP with SP3 or later
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Windows XP with SP3 or later
-| style="text-align: left; background: #F6F6FB;" rowspan="2"         | MS .NET Framework 3.5 or later
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | MS .NET Framework 3.5 or later
-| style="text-align: left; background: #F6F6FB;"         | 32 and 64 bit
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | 32 and 64 bit
 |-
 |}
-<font size="+2">
 At first {{{model|FMB1YX}}} device will have default factory settings set. These settings should be changed according to the user's needs.<br/>
 Device can be configured to acquire and send data to server, in this case the GSM settings shall be set in regards with GSM operator's information. If device GSM is unavailable, the device will not be able to send the data and {{{model|FMB1YX}}} will start storing records to flash memory. It is possible to store up to 192000 data records with 128 MB SD memory card (when 100 MB are used to store records). It will send data over GPRS when it is available. Note that {{{model|FMB1YX}}} might reach its full memory capacity. If such case happens, the device will start deleting the oldest records in order to save new ones.<br/>
@@ Line 38: / Line 31: @@
 Module configuration can be performed over USB cable. Configuration process begins by starting {{{model|FMB1YX}}} Configurator software and then connecting to {{{model|FMB1YX}}} device via <span style=color:#F6A83E>Connect</span> button located in <span style=color:#F6A83E>Online</span> header menu part. {{{model|FMB1YX}}} has one 4 editable profiles, whose can be loaded and saved to the device. After any modification of configuration the changes need to be saved to {{{model|FMB1YX}}} device using <span style=color:#F6A83E>Save</span> button.<br/>
 Main buttons offer following functionality:<br/>
-* <span style=color:#F6A83E>Load</span> – loads configuration from device.
+# '''Load''' – loads configuration from device.
-* <span style=color:#F6A83E>Save</span> – saves configuration to device.
+# '''Save''' – saves configuration to device.
-* <span style=color:#F6A83E>Load Defaults</span> – loads default configuration. Requires additional click on save button to save default into device.
+# '''Load Defaults''' – loads default configuration. Requires additional click on save button to save default into device.
-* <span style=color:#F6A83E>Load from file...</span> – loads configuration from file.
+# '''Load from file...''' – loads configuration from file.
-* <span style=color:#F6A83E>Save to file...</span> – saves configuration to file.
+# '''Save to file...''' – saves configuration to file.
-* <span style=color:#F6A83E>Reset device</span> – restarts device.
+# '''Reset device''' – restarts device.
-* <span style=color:#F6A83E>Device info</span> – shows status of some basic parameters.
+# '''Device info''' – shows status of some basic parameters.
-* <span style=color:#F6A83E>Get Actual Profile</span> – informs user about active profile.
+# '''Get Actual Profile''' – informs user about active profile.
-* <span style=color:#F6A83E>Add Keyword/Change Keyword/ Switch Security Off</span> – Create/Edit/Remove security key from device.
+# '''Add Keyword/Change Keyword/ Switch Security Off''' – Create/Edit/Remove security key from device.
-More details on using the Configurator can be found {{{config_link|in the manual}}}.
+More details on using the Configurator can be found '''{{{config_link|in the manual}}}'''.
-</font>