177
edits
Changes
Sending SMS to FMB devices with 1nce platform (view source)
Revision as of 15:50, 5 February 2020
, 15:50, 5 February 2020no edit summary
1. By going to the tab "My SIMs" you will see the list of 1nce SIM cards that are in your account. (It is possible to filter your available SIM cards by IMSI/ICCID/MSISDN/IMEI/IP ADDRESS)
1. By going to the tab "My SIMs" you will see the list of 1nce SIM cards that are in your account. (It is possible to filter your available SIM cards by IMSI/ICCID/MSISDN/IMEI/IP ADDRESS)
[[Image:1nce Platform.png|center]]
[[Image:1nce Platform.png|center||600px]]
2. To send SMS commands to the device. Select the SIM card to which the SMS command has to be sent. You will be forwarded to the "SMS" tab.
2. To send SMS commands to the device. Select the SIM card to which the SMS command has to be sent. You will be forwarded to the "SMS" tab.
3. Enter a Source Address which has to be a valid value. (Recommended to use from 1 to 65535). In the "Payload" field enter the desired SMS command. In the example "setdigout 1" command is sent.
3. Enter a Source Address which has to be a valid value. (Recommended to use from 1 to 65535). In the "Payload" field enter the desired SMS command. In the example "setdigout 1" command is sent.
[[Image:1nce_Platform_2.png|center]]
[[Image:1nce_Platform_2.png|center||600px]]
4. SMS command in payload has to be entered:
4. SMS command in payload has to be entered:
If you have set SMS login and password: login pass getinfo
If you have set SMS login and password: login pass getinfo
If SMS login and password are not set leave two spaces before command: aagetinfo
If SMS login and password are not set leave two spaces before command: aagetinfo