Template:FMB002 First start card: Difference between revisions
Kudalevas.da (talk | contribs) No edit summary |
Kudalevas.da (talk | contribs) No edit summary |
||
| Line 23: | Line 23: | ||
{{{insert1|[[Image:Fmb020 card 1.png|280px]]}}}{{{insert2|[[Image:Fmb020 card 2.png|280px]]}}}{{{insert3|[[Image:Fmb020 card 3.png|280px]]}}}{{{insert4|[[Image:Fmb020 card 4 | {{{insert1|[[Image:Fmb020 card 1.png|280px]]}}}{{{insert2|[[Image:Fmb020 card 2.png|280px]]}}}{{{insert3|[[Image:Fmb020 card 3.png|280px]]}}}{{{insert4|[[Image:Fmb020 card 4.png|280px]]}}} | ||
Revision as of 13:19, 2 April 2020
Advanced Plug and Track real-time tracking terminal with GNSS, GSM and Bluetooth connectivity
How to insert Micro-SIM card and connect battery
- Insert the SIM tray removal tool into the hole on the SIM card tray, and then push until the tray pops out.
- Insert Nano-SIM card as shown with PIN request disabled or read our Wiki how to enter it later in Teltonika Configurator. Make sure that Nano-SIM card is fitted properly into the tray.
- Attach the SIM card tray back.
- Open device top cover to access battery connector. Cover is opened by unclipping it at the recessed corner
- Connect the battery as shown to device.
- After configuration, see “PC Connection (Windows)”, attach device cover back.
Device is ready to be mounted.
 |
Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it. |
|
Do not insert the SIM card tray into the FMB device without a Micro-SIM card in it. Doing so could potentially damage the SIM card tray, which can make it impossible to insert the Micro-SIM card into the device. |