Changes

TAT140 Tracking settings (view source)

Revision as of 08:55, 10 May 2023

57 bytes added , 08:55, 10 May 2023

no edit summary

Line 103: Line 103:

4. Device goes to sleep for 28800 s.

5. If movement is detected for 20 seconds device switches to On Move scenario.

−

5.1 If On Move event record is Disabled no record ~~is generated~~.

+

5.1 If On Move event record is Disabled device does not generate a new record and starts On Move scenario timer.

5.2 If On Move event record is Enabled and valid fix is present, device sends last known good position.

−

5.3 If On Move event record is Enabled and valid fix is not present, device will wake up, obtain and send new position (GPS fix up to 3 minutes, record saved, ~~send~~ via GPRS up to 2 minutes)

+

5.3 If On Move event record is Enabled and valid fix is not present, device will wake up, obtain and send new position (GPS fix - up to 3 minutes, record saved, sent via GPRS - up to 2 minutes)

6. Device wakes up after 28800 seconds if device was not stationary for 600 seconds, see step 7. If device was stationary for 600 seconds, see step 10

7. Device is looking for GPS Fix (can take up to 3 min., depends on the environment)

Line 112: Line 112:

10. If device was stationary for 600 seconds during On Move scenario device switches to On Stop scenario.

10.1 If On Stop event record is Disabled device does not generate a new record and starts On Stop scenario timer.

−

10.2 If On Stop event record is Enabled device will wake up, obtain and send new position (GPS fix up to 3 minutes, record saved, ~~send~~ via GPRS up to 2 minutes)

+

10.2 If On Stop event record is Enabled device will wake up, obtain and send new position (GPS fix - up to 3 minutes, record saved, sent via GPRS - up to 2 minutes)

Karolis.C

Administrators

420

edits