Changes

no edit summary
Line 132: Line 132:  
|}
 
|}
    +
=='''Software'''==
 +
 +
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 +
|<strong>When opening the configurator, a .NET error is shown. I tried installing .NET 7.0, but the error remained. How can this be solved?  </strong>
 +
|-
 +
| New Configurators use the newer .NET version. Please make sure the correct version is installed. Please remove other (unused) .NET versions – more inforamtion can be found here:  Note #1: The Ways to determine the required version section is especially important here. It will help you decide which version you should choose. Note #2: x86 is recommended even with Microsoft Windows 64-bit Operating System.
 +
|}
 +
 +
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 +
|<strong>What is FOTA Web and how is it useful? Can you see the device's real-time location using this system? </strong>
 +
|-
 +
| FOTA Web is simply a device management platform that is used to assign files to the device remotely, such as firmware, configuration files, etc.
 +
FOTA Web does not report the device's real-time location.
 +
|}
 +
 +
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 +
|<strong>How to use the device transfer feature in FOTAWEB? </strong>
 +
|-
 +
| Device transfer is a feature in FOTAWEB that allows clients to directly move devices amongst their accounts without the need to involve Teltonika.
 +
More information about this feature can be found here: https://wiki.teltonika-gps.com/view/FOTA_WEB_Devices#Device_transfer
 +
|}
 +
 +
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 +
|<strong>How do I update configurations remotely via Teltonika FOTA Web? </strong>
 +
|-
 +
| Kindly use the FOTA Web to remotely update configurations to units as explained here: https://wiki.teltonika-gps.com/view/FOTA_WEB
 +
 +
Steps are:
   −
=='''Software'''==
+
1. Upload the configuration file in FOTA WEB under the files tab.
 +
 
 +
2. Head over to the devices tab then select the devices to receive the configuration.
 +
 
 +
3. Click on Create Task and choose Update Configuration on the drop-down then below it, choose the uploaded file, then click on Create Task.
 +
 
 +
The task will be executed the next time the device connects to FOTA WEB or you can force it to connect immediately by sending a command "  web_connect" with two spaces before the command and no quotes, or hard restart the unit by unplugging the power and the internal battery then plugging it back on then the task will be executed immediately.
 +
|}