Wialon and EYE proximity

Introduction

Teltonika Eye Beacons have two new scenarios related to RSSI value. RSSI means “Received Signal Strength Indicator” and this value can be use as distance indicator, or to know if the Beacon is detected by the FM tracker.

Following sections describe Proximity and Lost & Found Scenarios.

Eye Beacon Configuration

Devices work constantly and are ready to perform out of the box. Default basic Sensor settings are set to:

• Transmitting at 2 dBm power.
• Data advertising at 3 second intervals.
• Eddystone protocol

However, these parameters can be changed. Transmitting power can be set from -14dBm to 8dBm – higher transmitting power equates to a larger beacon range. Data advertising interval can be selected from the range 20ms to 10s, shorter data advertising intervals ensure a more stable signal. However, increasing power or reducing the advertising interval affects the battery life of the Eye Beacon.

EYE Beacon / BTSID1	EYE Sensor / BTSMP1
2+ years (Tx=2 dBm; interval: 1 s)	1+ year (Tx=2 dBm; interval: 1 s)
5+ years (Tx=2 dBm; interval: 3 s)	2.5+ years (Tx=2 dBm; interval: 3 s)
8+ years (Tx=2 dBm; interval: 5 s)	4+ years (Tx=2 dBm; interval: 5 s)
10+ years (Tx=2 dBm; interval: 10s)	5+ years (Tx=2 dBm; interval: 10s)

More information can be found here All configuration of the Eye Beacon will be done via EYEapp. On the app, wanted protocol can be selected, transmitting power, advertising interval and Beacon ID can be easily configured. Below is an example configuration.

Teltonika Configurator

Common Settings

We need to set up proper Protocol and Bluetooth settings in order to have beacons information

1. In System Settings Enable Codec8 Extended.
2. In Bluetooth® settings Enable Bluetooth®, set this setting as either "Enable (hidden)" or "Enable (visible)", otherwise Bluetooth® will be disabled.

Proximity Scenario

EYE beacon Proximity events is a functionality which creates three different types of records, depending on the captured Beacons RSSI level. This functionality is only supported with Teltonika EYE beacons. Proximity events consist of near, away and lost events:

• When EYE beacon RSSI level is below the first configured threshold, the beacon will be added to Near Beacon Record (AVL ID: 10828)
• When EYE BEACON RSSI level is between the second and first configured threshold, beacon is added to Away Beacon record (AVL ID: 10829)
• When EYE Beacon RSSI level is lower than the second configured threshold, beacon is added to Lost Beacon record (AVL ID: 10831). In the case of EYE Beacon disappearing from the environment and not being detected by the FM tracker anymore, the beacon will be added to Lost Beacon record and will be removed from Beacon list.

Event modes

• Disabled – Record generating is disabled for the selected range
• Periodic – Records will be periodically generated for the selected range, according to the configured record period on move or on stop value.
• On Change – Records will be generated as soon as the Eye Beacon number changes for the selected range.

Averaging Timeout

This parameter specifies how long it will take current RSSI value to reach new RSSI value. For example, current EYE Beacon RSSI value is -40 dBm. FMB captures same EYE Beacon with RSSI value of -60 dBm. If averaging timeout is configured to be 10 seconds, it will take 10 seconds for RSSI value to reach -60 dBm from -40 dBm. Keep in mind that this is assuming perfect conditions and subsequent EYE Beacon RSSI.

Lost & Found Scenario

Purpose of this functionality is to periodically generate records with all EYE Beacon list (AVL ID: 10828) and create eventual On Change records only when EYE Beacon is lost (AVL ID: 10831) or found (AVL ID: 10829).

Lost and Found Beacon records only include EYE Beacon which was lost or found, not the full Beacon list.

• If multiple EYE Beacons were found or lost at the same time, multiple will be included into the record.
• If Visible Beacon List is enabled, Beacon records containing the list of visible beacons will be generated according to the configured period parameters Record Period on Move and Record Period on Stop

Advanced Beacon protocol is being used to send Lost & Found records.

Note:Same AVL ID’s as for Proximity events are being used, since two features cannot work at the same time.

• AVL ID: 10828 Visible Beacon List (periodic)
• AVL ID: 10829 Found Beacon List (On Change)
• AVL ID: 10831 Lost Eye Beacon List (On Change)

Parsing Data

Proximity Parsing

Unparsed data

Received data in hexadecimal stream: 00000000000000BD8E030000018D1468C11B00E42CC908F1F475CC000000000300002A4C0001000000000000000000012A4C001401120001E50F067CD9F401EF770D01000E020BFE 0000018D1468C12500E42CC908F1F475CC000000000300002A4D0001000000000000000000012A4D001401120001C80F067CD9F40255BE0D01000E020BF40000018D1468C12F00E 42CC908F1F475CC000000000300002A4F0001000000000000000000012A4F001401120001B90F067CD9F4004B490D01000E020BFE03000086BA

AVL Data Packet
AVL Data Packet Part		HEX Code Part	Decoded
	Zero Bytes	00 00 00 00
	Data Field Length	00 00 00 BD	189 bytes
	Codec ID	8E	Codec8 Extended
	Number of Data 1 (Number of Total Records)	01
	Timestamp	00 00 01 83 68 95 27 93 (GMT: Tuesday, 18 June 2019 08:25:22.001)
	Priority	00
	Longitude	0f 0e 54 fc
	Latitude	20 9a b0 58
	Altitude	00 b3
	Angle	00 b4
	Satellites	0e
	Speed	00 00
	Event IO ID	2a 4f (10831)
	N of Total ID	00 01
	N1 of One Byte IO	00 00
	N2 of Two Bytes IO	00 00
	N4 of Four Bytes IO	00 00
	N8 of Eight Bytes IO	00 00
	NX of X Bytes IO	00 01
	N’th IO ID - AVL ID.	2a 4f (10831)
	Length of Variable Length IO	00 1e (30 bytes)
	Value of Variable Length IO 10831	011c0001a40110eb47706aa38255aa96f21a154e2d00550d01000e020bd6
	Number of Data 2 (Number of Total Records)	01
	CRC-16	00 01 2a 4f