Main Page > CAN Trackers & Adapters > ALL-CAN300
ALL-CAN300.png

ALL-CAN300 is designed to acquire CAN Bus data from:

  • Light vehicles (including electric cars)
  • Trucks
  • Buses and coaches
  • Agriculture transport
  • Special transport (Utility, Forest, Construction machinery)

Communication network can provide a wide range data that can be used to reduce running costs, improve driver safety, streamline maintenance processes and support environmental responsibility.

Supported vehicles features*

CAN bus data

  1. Total fuel consumption
  2. Fuel level (Dashboard) — Fuel level - percent or Fuel level - Liters
  3. Vehicle mileage — Vehicle mileage from dashboard or Vehicle mileage counted (from adapter installation)
  4. Door status — Front left door, Front right door, Rear right door, Rear left door, Trunk cover, Engine cover (hood)
  5. Engine speed (RPM)
  6. Oil pressure/level status
  7. Engine temperature
  8. Vehicle speed
  9. Accelerator pedal position
  10. VIN number
  11. Lights status (Parking, Dipped, Full beam, Front/Rear fog lights)
  12. CNG level
  13. Total CNG consumption
  14. Engine is working on CNG status
  15. AdBlue level (Dashboard)
  16. Webasto
  17. SIMPLE TACHO
  18. Seat belt status (Driver's seat belt, Passenger's set belt)
  19. Check engine, Lights failure, Low tire pressure... statuses
  20. AND MORE...

Electric vehicles CAN bus data

  1. Charging cable status
  2. Charging status
  3. Battery level
  4. Vehicle range on battery
  5. Battery temperature

Trucks, Buses, Agriculture and Special transport CAN bus data

  1. Axles loads
  2. Harvesting time
  3. Harvested area
  4. Grain mown volume
  5. Grain moisture
  6. Harvesting drum RPM
  7. Mowing status
  8. Threshing status
  9. Joystick status
  10. Light signal turned on status
  11. Grain tank status
  12. Hydraulic status
  13. Sprinkling status
  14. AND MORE...

* Number of parameters depends on vehicle model, year and equipment.

Technical features

PARAMETER VALUE
Minimum Typical Maximum Unit
Supply Voltage
Supply Voltage (Recommended Operating Conditions) +9 +12 +63,5 V
Current Consumption
Working Mode (with 12V) 23 mA
Sleep Mode (with 12V) 2 mA
Operating Temperature
Operating Temperature -40 +85 °C

Adapter changes

Software date Program No. digits Program No. in connection scheme Changes
<= 2017-09-01 3 XXX
> 2017-09-01 and < 2018-01-01 4 XXX → XXXX
  • New Program No. consist of 4 digits.
  • Digit "1" was added in front of existing Program numbers. For example: 882 → 1882.

FAQ

External Links

https://teltonika.lt/product/all-can300/

YouTube

Teltonika CAN adapters Part 1: Introduction
Teltonika CAN adapters Part 2: Installation