EYE SENSOR MESH/MTSMP1
Introduction
Wireless solutions open up new horizons for your business and help to keep an eye on your assets. Discover our brand-new and certified Bluetooth® Low Energy ID beacon model from Teltonika with robust waterproof casing and a long-lifetime battery. The model designed for a low-cost fast and easy configuration and integration to save precious time, resources, and ensure accountability.
About MTSID1
Perfect for traceability use cases, delivery tracking, monitoring of various movable objects in logistics (trailers, containers), agriculture (tractor attachments), and constructions (tools and inventory). Also, it suitable for indoor tracking solutions for items tracking in warehouses, hospitals, transport hubs and other types of industrial areas. EYE beacon supports iBeacon and Eddystone protocols. The device is fully compatible with the Teltonika firmware platform which provides extended functionality. Configure, scan, and update anytime anywhere with a dedicated Teltonika mobile app.
Product Specification
Features
| Battery and power | |
|---|---|
| Model | CR2450 |
| Type | Lithium, Manganese Dioxide (Li/MnO2) |
| Total Capacity | 600 mAh |
| Replaceable | No |
| Battery life (5 min) | 2 years* |
| Battery life (10 min), default | 3 years* |
| Battery life (30 min) | 6.5 years* |
| Battery life (60 min) | 10 years* |
*At ambient room temperature
| Dimensions and weight | |
|---|---|
| Dimensions | 56,6 mm x 38 mm x 13 mm |
| Weight | 19 g |
| Features | |
|---|---|
| Sensors | Temperature
Humidity Movement Magnet detection |
| Scenarios | Temperature tracking, Mobile objects tracking, Medical equipment tracking, Goods tracking |
| Sleep mode | Hibernate |
| Configuration and firmware update | Via Mesh |
| Electronics | |
|---|---|
| Microcontroller | Silicon Labs EFR32BG22C224F512GM32-C |
| Certification & approvals | |
|---|---|
| Certificates | CE/RED (EU), RoHS (EU), REACH (EU), IP rating |
| Connectivity | |
|---|---|
| Wirepas | Wirepas Mesh v5.4 |
| Available transmission power levels | Up to 6 dBm |
| Casing | |
|---|---|
| Protection | IP67 |
| Mounting | Two mounting points on each side |
| Marking | Available branding customisation upon request |
| Environmental Requirements | |
|---|---|
| Humidity (non-condensing) | From 0% to 100% |
| Operational temperature | -20 °C / +60 °C (-4 °F / +140 °F) |
Dimensions
Value-adding Features
Hibernate mode
Hibernated mode means that the EYE device is OFF when shipping from the factory, preserving battery life. PLEASE NOTE that EYE devices are available in two modes: factory-activated (ON) or Hibernated (OFF). You may order the device version which better suits your needs. Order codes are described on eye page
Value of hibernate mode
Hibernated versions of EYE devices simplify stock management for our partners while maximizing battery life.
1. Accelerated delivery times:
By stocking up on hibernated EYE devices, you ensure readiness to deploy EYE devices with full battery capacity at any moment. This proactive approach provides fastest possible service, increases your reputation for efficiency and positions you as an industry front runner, enhancing your competitive edge.
2. Mitigated project risks:
In scenarios where projects encounter unforeseen challenges, our hibernated EYE devices offer a buffer. Hibernate feature allows to safeguard your investments and potential revenue streams. This means that even if projects encounter delays or complications, you can still deploy EYE devices with full battery capacity, ensuring optimal performance when the time is right.
How to activate hibernated eye device?
Attach any magnet to sleeping device and wait for LED to blink.
NOTE: ANY MAGNET CAN BE USED
Now device is active.
How to send the device to hibernate mode?
If you want to put the EYE device back to hibernate mode after accidental activation or simply pause its use, you may do that following steps below:
Step 1. While connected and in overview tap "Send device to sleep":
Step 2. Confirm your selection:
Step 3. Wait for EYE App to disconnect:
Can All devices hibernate?
1. All EYE Sensors with firmware version starting from 1.2.9.R.8 can hibernate.
2. Only new EYE Beacons bought with order codes that have hardware modification can hibernate standard codes are available in eye page, for special order codes consult your sales manager.
Mounting recomendations
EYE Beacon Protocol overview
Protocol description
TBA
Safety information
This message contains information on how to operate MTSID1 safely. By following these requirements and recommendations, you will avoid dangerous situations. You must read these instructions carefully and follow them strictly before operating the device!
1. To avoid mechanical damage, it is advised to transport the device in an impact-proof package.
2. In case of malfunction contact your Teltonika account manager or write to the technical support team over the Partner Portal/Helpdesk.
Certification & Approvals
| Certificates | Links | Valid for Model |
|---|---|---|
| FCC (USA) | Yes | All |
| CE/RED (EU) | Yes | All |
| RoHS (EU) | Yes | All |
| REACH (EU) | Yes | All |
| IP rating | Yes | All |
Memberships
| Name | Links |
|---|---|
| WEEE | Yes |
| Battery WEEE | Yes |
Nomenclature & Classification codes
| Name | Links |
|---|---|
| EAN UpdateDU | Yes |
| HS | Yes |
| ECCN | Yes |
External Links
Product Page
https://teltonika-gps.com/eye/ UpdateDU
Product Change Notifications
The latest Product Change Notifications can be found: Product Change Notifications UpdateDU
Software Errata
Firmware Errata: BTS firmware errata UpdateDU
Promotional Material
Product Promotional Material Page UpdateDU
Partner Providers Supporting Software
- TBA
Frequently asked questions (FAQ)
- TBA
Documents
- TBA
Additional information
For EOL policy please refer to link here.