LV-CAN200

From Wiki Knowledge Base | Teltonika GPS
Main Page > CAN Trackers & Adapters > LV-CAN200
CAN200-7-2.png

LV-CAN200 is designed to acquire CAN Bus data from:

  • Light vehicles (including electric cars)
  • Trucks
  • Buses and coaches

Access to CAN Bus data enables fleet operators to report on a wide range of information. You can effectively identify areas of improvement within their vehicle operation to drive down overheads and minimize environmental impact.

Supported vehicles features*

  1. Total fuel consumption
  2. Fuel level (Dashboard)
  3. Vehicle mileage — Vehicle mileage from dashboard or Vehicle mileage counted (from adapter installation)
  4. Door status — Front left door, Front right door, Rear right door, Rear left door, Trunk cover, Engine cover (hood)
  5. Engine speed (RPM)
  6. Oil pressure/level status
  7. Engine temperature
  8. Vehicle speed
  9. Accelerator pedal position
  10. CNG level
  11. Total CNG consumption
  12. Engine is working on CNG

* Number of parameters depends on vehicle model, year and equipment.

Technical features

PARAMETER VALUE
Minimum Typical Maximum Unit
Supply Voltage
Supply Voltage (Recommended Operating Conditions) +9 +12 +50 V
Current Consumption
Working Mode (with 12V) 50 mA
Sleep Mode (with 12V) 2 mA
Operating Temperature
Operating Temperature -40 +85 °C

Adapter changes

Manufacture date Software date Program number digits Program number in connection scheme Notes
<2018-01-01 <= 2017-09-01 3 XXX
> 2017-09-01 and < 2018-01-01 4 XXX → XXXX
>= 2018-01-01 >= 2018-01-01 5 XXXX → XXXXX screw moved by 0,5 cm

FAQ

External Links

https://teltonika.lt/product/lv-can200/

YouTube

Teltonika CAN adapters Part 1: Introduction
Teltonika CAN adapters Part 2: Installation