Template:FMB002 First start card

Advanced Plug and Track real-time tracking terminal with GNSS, GSM and Bluetooth connectivity

How to insert Micro-SIM card and connect battery

1. Insert the SIM tray removal tool into the hole on the SIM card tray, and then push until the tray pops out.
2. Insert Nano-SIM card as shown with PIN request disabled or read our Wiki how to enter it later in Teltonika Configurator. Make sure that Nano-SIM card is fitted properly into the tray.
3. Attach the SIM card tray back.
4. Open device top cover to access battery connector. Cover is opened by unclipping it at the recessed corner
5. Connect the battery as shown to device.
6. After configuration, see “PC Connection (Windows)”, attach device cover back.

Device is ready to be mounted.

Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.