Default Parameters Values Update
From Wiki Knowledge Base | Teltonika GPS
Revision as of 12:41, 2 October 2023 by Airidas.S (talk | contribs) (→Default Parameters Values Update)
Default Parameters Values Update
Starting from firmware version 03.29.00.Rev.04 default values of some parameters were updated to provide more comfortable out of the box solution for all clients. List of parameter changes:
| Name | Default value in 03.27.XX firmware versions | Default value in 03.29.XX firmware versions |
| Parameter ID 102 - (Sleep Mode / Sleep Settings) | 2 - (Deep Sleep) | 3 - (Online Deep Sleep) |
| Parameter ID 103 - (Sleep Mode / Sleep Timeout (minutes)) | 1440 | 120 |
| Parameter ID 234 - (Assisted GPS Settings / Allow AGPS in Home Network) | 1 - (Enable) | 0 - (Disabled) |
| Parameter ID 11004 - (Eco/Green Driving / Max Acceleration (m/s^2)) | 2.50 | 2.31 |
| Parameter ID 11005 - (Eco/Green Driving / Max Braking (m/s^2)) | 2.70 | 2.52 |
| Parameter ID 11006 - (Eco/Green Driving / Max Cornering (rad/s)) | 3.40 | 2.94 |
| Parameter ID 11502 - (Unplug Detection / Unplug Detection Mode) | 0 - (Simple) | 1 - (Advanced) |
| Parameter ID 11407 - (Crash Detection / Duration (ms)) | 20 | 10 |
| Parameter ID 11406 - (Crash Detection / Crash Trace) | 0 - (Disable) | 2 - (Trace Full) |
| Parameter IDs 20101,20121,20141, etc - (Manual Geofence / X geozone / Generate Event) | 0 - (No Event) | 3 - (On Both) |
| Parameter ID 11816 - (BT 4.0 / Scan retries until error (seconds)) | 30 | 10 |
| Parameter ID 11120 - (CAN Adapter / Program number) | 0 | 11120 |
| Parameter ID 11661 - (Towing / Data Acquisition Change) | 0 - (None) | 1 - (Low) |
| Parameter ID 40280 - (OBDII / Fuel Level / Priority) | 0 - (None) | 1 - (Low) |
| Parameter ID 40410 - (OBDII / VIN / Priority) | 0 - (None) | 1 - (Low) |
| Parameter ID 40440 - (OBDII / OEM Fuel Level / Priority) | 0 - (None) | 1 - (Low) |
| Parameter ID 40430 - (OBDII / OEM Total Mileage / Priority) | 0 - (None) | 1 - (Low) |
| Parameter ID 40420 - (OBDII / Fault Codes / Priority) | 0 - (None) | 1 - (Low) |
| Parameter ID 40410 - (OBDII / Number of DTC / Priority) | 0 - (None) | 1 - (Low) |
| Parameter ID 40400 - (OBDII / Fuel Rate / Priority) | 0 - (None) | 1 - (Low) |
| Parameter ID 40160 - (OBDII / Engine RPM / Priority) | 0 - (None) | 1 - (Low) |
| Parameter ID 40170 - (OBDII / Vehicle Speed / Priority) | 0 - (None) | 1 - (Low) |
| Parameter ID 40110 - (OBDII / Engine Load / Priority) | 0 - (None) | 1 - (Low) |
| Parameter ID 40370 - (OBDII / Hybrid battery pack remaining life / Priority) | 0 - (None) | 1 - (Low) |
| Parameter ID 40120 - (OBDII / Coolant Temperature / Priority) | 0 - (None) | 1 - (Low) |
| Parameter ID 40230 - (OBDII / Distance traveled MIL on / Priority) | 0 - (None) | 1 - (Low) |
More details on parameter description and list can be found in Parameter list
