Test-AC

Authorized Read Notification

Important: iButton Read Notification feature has been replaced with Authorized Read Notification starting from Firmware Ver.03.30.00

Authorized read notification feature allows the control of selected DOUT for a configured period, when Authorized ID is read using 1-Wire or RFID Reader, or when Authorized Beacon is detected. If Authorized ID List is empty or Beacon detection is set to All, then any detected ID or Beacon can control selected DOUT. Parameter Depend on Ignition allows to disable DOUT control, while Ignition is being detected. It is necessary to select at least one source for this functionality to work.

Authorized Read Notification parameters:

Output Control – available scenario settings for module Digital output activation/deactivation
DOUT ON Duration – a value in seconds, for how long DOUT1/DOUT2 should be active or inactive.
Authorization ID List Checking - Provides Authorized ID information from a designated source.
- FMB devices that do not have RS232 will have support for 1-Wire and Beacon only.
- FMB devices that do not have RS232 and 1-Wire will have support for Beacon only.
Depend on Ignition - Output will be triggered only if ignition is off.

Note: Authorized read notification is disabled in deep sleep, online deep sleep and ultra deep sleep modes.