LV-CAN200

LV-CAN200 is designed to acquire CAN Bus data from:

• Light vehicles (including electric cars)
• Trucks
• Buses and coaches

Access to CAN Bus data enables fleet operators to report on a wide range of information. You can effectively identify areas of improvement within their vehicle operation to drive down overheads and minimize environmental impact.

Supported vehicle data*

1. Total fuel consumption
2. Fuel level (Dashboard)
3. Vehicle mileage
4. Door status (Front left door, front right door, rear right door, rear left door, trunk cover, engine cover (hood))
5. Engine speed (RPM)
6. Oil pressure / level
7. Engine temperature
8. Vehicle speed
9. Accelerator pedal position
10. CNG level
11. Total CNG consumption
12. Engine is working on CNG

* Number of parameters depends on vehicle model, year and equipment.

Technical features

PARAMETER	VALUE
	Minimum	Typical	Maximum	Unit
Supply Voltage
Supply Voltage (Recommended Operating Conditions)	+9	+12	+50	V
Current Consumption
Working Mode (with 12V)		50		mA
Sleep Mode (with 12V)		2		mA
Operating Temperature
Operating Temperature	-40		+85	°C

Adapter changes

Software version	Program number digits	Program number in connection scheme	Notes
<= 2017-09-01	3	XXX
> 2017-09-01 and < 2018-01-01	4	XXX → XXXX
>= 2018-01-01	5	XXXX → XXXXX	screw moved by 0,5 cm

FAQ

• How to connect LV-CAN200 to:
  • FMB110
  • FMB120
  • FMB122
  • FMB125
  • FMA110
  • FMA120
  • FMB630
  • FMB640
  • FM6300
  • FM6320
  • FM36M1
  • FM3622
  • FM3612

• Troubleshooting LV-CAN200, ALL-CAN300, CAN-CONTROL
• How to capture CAN adapter log from FMB1YX?
• How to capture CAN adapter log from FM device?
• Connection scheme shows the use of a resistor. What power resistor should I choose?
• Connection scheme shows two CAN wires of the same color connected to one connector