Template:MSP First start card
From Wiki Knowledge Base | Teltonika GPS
Revision as of 03:21, 26 March 2020 by Tomas.kriauciunas (talk | contribs) (Created page with "centre <b>{{{description|MSP500 is a special tracking terminal contains an integrated buzzer and a relay for a speed limiting functionality ba...")
MSP500 is a special tracking terminal contains an integrated buzzer and a relay for a speed limiting functionality based on a fuel pump power supply switching.
How to insert Micro-SIM card and connect the battery
- Gently remove MSP500 cover using plastic pry tool from both sides.
Note: To properly open a new case please watch this video.
- Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Teltonika Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot. SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.
- Connect battery as shown to device. Position the battery in place where it does not obstruct other components.
- After configuration, see “PC Connection (Windows)”, attach device cover back.
Device is ready to be installed.
 |
Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it. |
How to insert microSD card
- Push microSD card lock case.
- Open microSD card locker.
- Correctly insert microSD card into slot.
- Close microSD card locker.
- Push microSD card lock case to locked position.
