Template:MSP First start card

From Wiki Knowledge Base | Teltonika GPS
Qsg rut950 teltonika.PNG


MSP500 is a special tracking terminal with GNSS/GSM/Bluetooth connectivity, internal GNSS/GSM antennas, RS232 interface for ESC/POS printer support and internal Ni-Mh battery. Moreover, device contains integrated buzzer and relay for a speed limiting functionality based on a fuel pump power supply switching

MSP500 PNG 4000x4000 1.png


Know your device[edit source]

MSP500 know your device-2.png


How to insert Micro-SIM card and connect the battery[edit source]

  1. Gently remove MSP500 cover using plastic pry tool from both sides.
  2. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Teltonika Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
  3. Connect battery as shown to device. Position the battery in place where it does not obstruct other components.
  4. After configuration, see “PC Connection (Windows)”, attach device cover back.

Device is ready to be installed.

MSP500 cover 1.pngMSP500 cover 2.pngMSP500 cover 3.pngMSP500 cover 4.png

Alert.png
Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.