Inateck BCST-70 First Start

Inateck Barcode Scanner Configuration

Configure Scanner for using Enter as Suffix

Power on Inateck BCST-70 by toggling switch from OFF to ON.

IMPORTANT NOTE : Inateck Scanner could not scan Barcodes through screen/monitor, barcodes should be printed as hard copy to proceed on the configuration.

1. Scan the "Enter Setup" barcode;

1. Scan the "Apply Enter as Stop Character" barcode;

1. Scan the "Exit with Save" barcode

FMX125 device connection to Irridium edge via FMX125 devices.

FMX640 device connection to Irridium edge via FMX640 devices.