General PCN

From Wiki Knowledge Base | Teltonika GPS
Main Page > General Information > General PCN

2024 January: Bluetooth® symbol added on laser engraving

Teltonika Telematics, UAB became an Adopter member of the Bluetooth® Special Interest Group (Bluetooth® SIG), which allows the use of published Bluetooth® wireless specifications and Bluetooth® trademarks. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc. Any use of these marks by Teltonika Telematics, UAB is under license.

For this reason, Teltonika Telematics, UAB will add the Bluetooth® symbol on the company products with the Bluetooth® technology laser engravings.

Change description
Change type Adding the Bluetooth® symbol after a device name on laser engravings with standard Teltonika Telematics engraving design.

Deleting BLE word from laser engravings with standard Teltonika Telematics engraving design.

Detailed description The example of TFT100 device laser engraving. All Teltonika Telematics devices with the Bluetooth® technology are going to be gradually updated in the same way.
Old version:
Old version TFT100.png
New version:
New version TFT100.png
Change reasons As Teltonika Telematics, UAB joined the Bluetooth® SIG Adopter membership, the Bluetooth® symbol is added in the laser engravings of the company’s devices.
Release date The updated laser engravings of standard Teltonika Telematics design will be implemented in January 2024, allowing the transition period of 4-6 weeks. During this period, devices may be delivered with the old Teltonika Telematics laser engraving design.
Affected products
Model Affected order codes Order code changes
All Teltonika Telematics products with the Bluetooth® technology. All Teltonika Telematics order codes with standard Teltonika Telematics laser engraving design. No changes
Acknowledgement of PCN receipt
If no feedback is received within one week after issuing this notification, Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above.
Important note
If you have a specific laser engraving design and would like to update it with the Bluetooth® symbol, please contact your sales manager to coordinate and organize these changes.

2024 February: TM2500 module information display changes

We want to inform you on information display changes for 2G devices modules TM2500 starting from February 2024.

Change description
Change type External/visual
Detailed description As a result of concerns regarding the engraving on the TM2500 module, we have added an option to use stickers to ensure the information remains legible and easily accessible. For orders made between February and April, your device may feature either a sticker or laser engraving on the TM2500 module.
Old Version:
TM2500 laser v1.png
New Version:
TM2500 sticker v1.png
Change reasons As a result of concerns regarding the engraving on the TM2500 module, we've opted to use stickers instead to ensure the information remains legible and easily accessible.
Product release date For orders made between February and April, your device may feature either a sticker or laser engraving on the TM2500 module
Affected products
Model Affected order codes Order code changes
FMB001, FMB010, FMB110, FMB120, FMB122, FMB125, FMB130, FMB140, FMB150, FMB202, FMB204, FMB209, FMB225, FMB230, FMB240, FMB900, FMB910, FMB920, FMB930, FMB965, FMT100, FMP100, TFT100, FMB641,TMT250, GH5200. FMB001******, FMB010******,FMB110******, FMB120******, FMB122******, FMB125******, FMB130******, FMB140******, FMB150******, FMB202******, FMB204******, FMB209******, FMB225******, FMB230******, FMB240******, FMB900******, FMB910******, FMB920******, FMB930******, FMB965******, FMT100******, FMP100******,TFT100******, TMT250******, GH5200******. No changes
Change impact
Risk assessment For orders made between February and April, your device may feature either a sticker or laser engraving on the TM2500 module. It's important to emphasize that these alterations do not impact the device's functionality or certification.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above

2024 January: Bluetooth® symbol added on laser engraving

Teltonika Telematics, UAB became an Adopter member of the Bluetooth® Special Interest Group (Bluetooth® SIG), which allows the use of published Bluetooth® wireless specifications and Bluetooth® trademarks. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc. Any use of these marks by Teltonika Telematics, UAB is under license.

For this reason, Teltonika Telematics, UAB will add the Bluetooth® symbol on the company products with the Bluetooth® technology laser engravings.

Change description
Change type Adding the Bluetooth® symbol after a device name on laser engravings with standard Teltonika Telematics engraving design.

Deleting BLE word from laser engravings with standard Teltonika Telematics engraving design.

Detailed description The example of TFT100 device laser engraving. All Teltonika Telematics devices with the Bluetooth® technology are going to be gradually updated in the same way.
Old version:
Old version TFT100.png
New version:
New version TFT100.png
Change reasons As Teltonika Telematics, UAB joined the Bluetooth® SIG Adopter membership, the Bluetooth® symbol is added in the laser engravings of the company’s devices.
Release date The updated laser engravings of standard Teltonika Telematics design will be implemented in January 2024, allowing the transition period of 4-6 weeks. During this period, devices may be delivered with the old Teltonika Telematics laser engraving design.
Affected products
Model Affected order codes Order code changes
All Teltonika Telematics products with the Bluetooth® technology. All Teltonika Telematics order codes with standard Teltonika Telematics laser engraving design. No changes
Acknowledgement of PCN receipt
If no feedback is received within one week after issuing this notification, Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above.
Important note
If you have a specific laser engraving design and would like to update it with the Bluetooth® symbol, please contact your sales manager to coordinate and organize these changes.

2024.05.02: Changes in manufacturing of dual-SIM tracking devices

Dual-SIM holder is designed to work with standard Mini SIM cards. The thickness of Mini SIM is 0.76mm (2FF standard). However, certain SIM cards are thinner, e.g. Nano SIM thickness is 0.65mm (3FF standard). Recently, more and more operators provide 3-in-1 SIM cards with the thickness of 0.65mm, i.e. the whole SIM card thickness, not only Nano SIM card part. Reacting to this, the top (SIM2) slot of FMB122, FMB125, FMB125, FMC125, FMM125, FMB225, FMC225, FMC650, FMM650 will be filled with ‘dummy’ SIM card from May 2024. By placing the additional ‘dummy’ SIM card, the bottom (SIM1) card is pressed firmly to ensure a reliable connection.


Change description
Change reason Ongoing quality assurance efforts to enhance the functionality and reliability of SIM card connection in our tracking devices.
Detailed description Devices will be shipped with an additional ‘dummy’ SIM card placed in the top slot of a dual-SIM holder. By placing the additional ‘dummy’ SIM card, the bottom SIM card is pressed firmly to ensure a reliable connection. Devices will leave the factory with the ‘dummy’ SIM card inserted in the top (SIM2) slot:

SIM2 filled.jpg
Detailed description Devices ordered with client SIM cards will have both the ‘dummy’ SIM card in the top (SIM2) slot and the client SIM card in the bottom (SIM1) slot:

Both SIM filled.jpg
Affected products
Model Affected order codes Order code changes
FMB122, FMB125, FMC125, FMM125, FMB225, FMC225, FMC650, FMM650 (DUAL SIM OPTIONS) FMB122******, FMB125******,FMC125******, FMM125******, FMB225******, FMC225******, FMC650******, FMM650******, No changes
Change impact
Risk assessment The change is implemented to ensure the reliability of SIM card connection in our tracking devices. ‘Dummy’ SIM cards may vary in color.
Suggested implementation plan
If you are using 2 SIM cards, please replace the ‘dummy’ card with the second SIM card in the top (SIM2) slot. We recommend to use standard Mini SIM cards for future orders when possible. No action is required for the devices in the field or in stock.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above

2024 January: Bluetooth® symbol added on laser engraving

Teltonika Telematics, UAB became an Adopter member of the Bluetooth® Special Interest Group (Bluetooth® SIG), which allows the use of published Bluetooth® wireless specifications and Bluetooth® trademarks. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc. Any use of these marks by Teltonika Telematics, UAB is under license.

For this reason, Teltonika Telematics, UAB will add the Bluetooth® symbol on the company products with the Bluetooth® technology laser engravings.

Change description
Change type Adding the Bluetooth® symbol after a device name on laser engravings with standard Teltonika Telematics engraving design.

Deleting BLE word from laser engravings with standard Teltonika Telematics engraving design.

Detailed description The example of TFT100 device laser engraving. All Teltonika Telematics devices with the Bluetooth® technology are going to be gradually updated in the same way.
Old version:
Old version TFT100.png
New version:
New version TFT100.png
Change reasons As Teltonika Telematics, UAB joined the Bluetooth® SIG Adopter membership, the Bluetooth® symbol is added in the laser engravings of the company’s devices.
Release date The updated laser engravings of standard Teltonika Telematics design will be implemented in January 2024, allowing the transition period of 4-6 weeks. During this period, devices may be delivered with the old Teltonika Telematics laser engraving design.
Affected products
Model Affected order codes Order code changes
All Teltonika Telematics products with the Bluetooth® technology. All Teltonika Telematics order codes with standard Teltonika Telematics laser engraving design. No changes
Acknowledgement of PCN receipt
If no feedback is received within one week after issuing this notification, Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above.
Important note
If you have a specific laser engraving design and would like to update it with the Bluetooth® symbol, please contact your sales manager to coordinate and organize these changes.

2024 February: TM2500 module information display changes

We want to inform you on information display changes for 2G devices modules TM2500 starting from February 2024.

Change description
Change type External/visual
Detailed description As a result of concerns regarding the engraving on the TM2500 module, we have added an option to use stickers to ensure the information remains legible and easily accessible. For orders made between February and April, your device may feature either a sticker or laser engraving on the TM2500 module.
Old Version:
TM2500 laser v1.png
New Version:
TM2500 sticker v1.png
Change reasons As a result of concerns regarding the engraving on the TM2500 module, we've opted to use stickers instead to ensure the information remains legible and easily accessible.
Product release date For orders made between February and April, your device may feature either a sticker or laser engraving on the TM2500 module
Affected products
Model Affected order codes Order code changes
FMB001, FMB010, FMB110, FMB120, FMB122, FMB125, FMB130, FMB140, FMB150, FMB202, FMB204, FMB209, FMB225, FMB230, FMB240, FMB900, FMB910, FMB920, FMB930, FMB965, FMT100, FMP100, TFT100, FMB641,TMT250, GH5200. FMB001******, FMB010******,FMB110******, FMB120******, FMB122******, FMB125******, FMB130******, FMB140******, FMB150******, FMB202******, FMB204******, FMB209******, FMB225******, FMB230******, FMB240******, FMB900******, FMB910******, FMB920******, FMB930******, FMB965******, FMT100******, FMP100******,TFT100******, TMT250******, GH5200******. No changes
Change impact
Risk assessment For orders made between February and April, your device may feature either a sticker or laser engraving on the TM2500 module. It's important to emphasize that these alterations do not impact the device's functionality or certification.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above

2024 January: Bluetooth® symbol added on laser engraving

Teltonika Telematics, UAB became an Adopter member of the Bluetooth® Special Interest Group (Bluetooth® SIG), which allows the use of published Bluetooth® wireless specifications and Bluetooth® trademarks. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc. Any use of these marks by Teltonika Telematics, UAB is under license.

For this reason, Teltonika Telematics, UAB will add the Bluetooth® symbol on the company products with the Bluetooth® technology laser engravings.

Change description
Change type Adding the Bluetooth® symbol after a device name on laser engravings with standard Teltonika Telematics engraving design.

Deleting BLE word from laser engravings with standard Teltonika Telematics engraving design.

Detailed description The example of TFT100 device laser engraving. All Teltonika Telematics devices with the Bluetooth® technology are going to be gradually updated in the same way.
Old version:
Old version TFT100.png
New version:
New version TFT100.png
Change reasons As Teltonika Telematics, UAB joined the Bluetooth® SIG Adopter membership, the Bluetooth® symbol is added in the laser engravings of the company’s devices.
Release date The updated laser engravings of standard Teltonika Telematics design will be implemented in January 2024, allowing the transition period of 4-6 weeks. During this period, devices may be delivered with the old Teltonika Telematics laser engraving design.
Affected products
Model Affected order codes Order code changes
All Teltonika Telematics products with the Bluetooth® technology. All Teltonika Telematics order codes with standard Teltonika Telematics laser engraving design. No changes
Acknowledgement of PCN receipt
If no feedback is received within one week after issuing this notification, Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above.
Important note
If you have a specific laser engraving design and would like to update it with the Bluetooth® symbol, please contact your sales manager to coordinate and organize these changes.


2023 December: Updated Teltonika Telematics product packing boxes

We are dedicated to continuously improving our products to provide you with the best possible experience. As part of this commitment, we are pleased to inform you about the recent updates to our product packaging.

Change description
Change type New QR codes with links to Teltonika Telematics Website, Wiki page and FOTA WEB system

Mark of conformity with the regulations in Ukraine

Slogan ‘Easy Key to IoT’

Print colour change from blue/black to white

Detailed description Teltonika Telamatics box print:
Old version:

New version:


Change reasons Following these changes, the new marking will be streamlined with Teltonika visual representation and Teltonika Telematics customers will be able to access the most relevant Teltonika Telematics online resources easily and conveniently by scanning the newly added QR codes.
Release date The new marking of ECO packing boxes with the updated Teltonika Telematics print will be implemented in December 2023, allowing the transition period of 4-6 weeks. During this period, packages may be delivered with the old Teltonika Telematics print.
Affected products
Model Affected order codes Order code changes
All Teltonika products with standard branded ECO packing boxes - No changes
Acknowledgement of PCN receipt
If no feedback is received within one week after issuing this notification, Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above.

2023 October: Product ECO packing box identification/marking changes

We would like to inform you that Teltonika Telematics is going to update printed information on the ECO boxes. Therefore, customers will receive boxes with printed QR link to the Quick manual.

Change description
Change type ECO boxes printed information update
Detailed description Printed QR link to the Quick manual on ECO boxes
Old version:
Print version of single ECO packing on175x150x35mm box marking:
Old Print 1.png
Print version of group ECO packing on 355x175x60mm box marking:
Old Print 2.png
Print version of ECO packing on 173x148x71mm box marking:
Old Print 3.jpg
New version:
Print version of single ECO packing on175x150x35mm box marking:
New Print 1.png
Print version of group ECO packing on 355x175x60mm box marking:
New Print 2.png
Print version of ECO packing on 173x148x71mm box marking:
New Print 3.jpg
Change reasons Teltonika Telematics customers will be able to find information about the product more easily and it will be possible to avoid printed quick manual
Products release date New ECO packaging box marking will be updated during October of 2023, with 4-6 weeks of transition period. Over this period package can be delivered with an old print.
Affected products
Model Affected order codes Order code changes
All Teltonika product with standard branded ECO packing boxes - No changes
Acknowledgement of PCN receipt
If no feedback is received within one week after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above

2023.03.07: GSM/LTE antenna bridge color difference

We would like to inform that you might receive FMx devices with different GSM/LTE antenna bridge color (except FMX64, FMM00A, FMX13A, FMB003, FMB020, FMB002, FMP100)

Change description
Change type GSM/LTE antenna bridge color mismatch
Detailed description GSM antenna bridge color mismatch
Old version:
Silver color GSM/LTE antenna bridge
Old GSM antenna.png
New version:
Gold/brass shade or Silver color GSM/LTE antenna bridge
New GSM antenna.png
Change reasons Some of the devices will be produced with antenna which color might be different from previous batches. Some of the antennas during production might change color to gold/brass shade.
Products release date 2023 March
Affected products
Model Affected order codes Order code changes
All currently produced FM device except (except FMX64, FMM00A, FMX13A, FMB003, FMB020, FMB002, FMP100) FMxxxx******* No actual part change, only color of GSM/LTE antenna bridge might have gold/brass shade.
Change impact
Risk assessment Testing of antennas which color has changed after production, to gold/brass shade have been performed and the results are the same to silver color antennas - no risk or affect in GSM/LTE signal because of the color change.
Suggested implementation plan No implementation is needed
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above

2022 February: QR codes replace printed packing lists

We would like to inform you that Teltonika Telematics is going to replace printed packing lists with QR codes available on the packaging boxes.

Change description
Change type Packing change
Detailed description QR codes replace printed packing lists
Old version:

Printed packing lists are included in group packaging boxes.

New version:

When QR codes are introduced, packing lists will be available to download and print in Helpdesk. Instruction how to use functionality can be download from here

2021-12-21 14 09 52-.png
Change reasons Teltonika Telematics product packaging will become both more efficient and eco-friendly.
Products release date 2022 February

2021.10.03 - 2021.10.10: Product ECO packing box identification/marking changes

We would like to inform you, that from October 3rd to 10th, the packaging robot will be upgraded in production, which will temporarily make it impossible to use the box press printer. As a result, all boxes made on those days will have a sticker printed and affixed instead of a print. Therefore, customers can receive packages with a sticker instead of a print for some time.

Change description
Change type ECO Package marking type
Detailed description Packing direct printing on box technology will be temporarely replaced by the sticker. Information will remain the same.
Print version of single ECO packing box marking:
New-single.png
Version of group ECO packing box marking:
New-group.png
Temporary version of single ECO packing box marking:
Old-single.png
Version of group ECO packing box marking:
Old-group.png
Change reasons Upgrade of packing robot in the manufacturing facility.
Product release date October 3rd-10th.
Affected products
Model Affected order codes Order code changes
All Teltonika brand product ECO packing boxes - No changes


Acknowledgement of PCN receipt
If no feedback is received within one week after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above

2021.07.16: Hardware change

We would like to inform you about the hardware change for FMx devices (except FMX64) starting from September of 2021.

Change description
Change type Hardware change
Detailed description New Flash memory component
Old version:
FMx devices with the current Flash memory component (128 MB) part number
New version:
FMx devices with the new Flash memory component (128 MB) part number
Change reasons Response to the global situation in component market and assurance of devices production lead time
Products release date 2021 September
Affected products
Model Affected order codes Order code changes
All currently produced FM device except (FMx64 family devices) FMxxxx******* Current Flash memory component change to new Flash memory component
Change impact
Risk assessment Current CE and E-mark certificates are valid. Also, current purchase codes remain the same.
Suggested implementation plan No special actions are needed for the devices used with base FW, devices will arrive from factory with the latest FW which supports new Flash memory component. Flash memory size remains 128 MB. For the clients that are using Spec. FW, more detailed information will be provided directly
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above

2021.04.30: Product ECO packing box identification/marking changes

We would like to inform you, that Teltonika products ECO packing boxes will be marked by direct printing on its technology, instead of printing on the sticker, starting from the 19th week of 2021.

Change description
Change type ECO Package marking type
Detailed description Packing box sticker will be replaced by direct printing on box technology. Information will remain the same.
Old version of single ECO packing box marking:
Old-single.png
Old version of group ECO packing box marking:
Old-group.png
New version of single ECO packing box marking:
New-single.png
New version of group ECO packing box marking:
New-group.png
Change reasons To improve manufacturing efficiency, reliability and to have more eco-friendly packages.
Product release date New ECO packaging box marking will be released in manufacturing from the 19th week (middle of May) of 2021, with 4-6 weeks of transition period. Over this period package can be delivered with the old version sticker as well as a package with the new direct printing technology.
Affected products
Model Affected order codes Order code changes
All Teltonika brand product ECO packing boxes - No changes
Change impact
Risk assessment Clients’ special-order codes with special boxes will be changed on clients’ demand.
Suggested implementation plan If you are using special box version and would like an upgrade it to new, please contact your Teltonika Telematics sales manager.

Due to changes in package marking appearance we recommend contacting your customs agent with our change notification information, to avoid any unexpected delays in the customs clearance process.

Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above