FIRMWARE VERSION
|
RELEASE DATE
|
CHANGES
|
---|
1.2.11.R.08
|
2024.07.16
|
- Firmware Merge: hibernating and non-hibernating manufacturing is available in single firmware.
- RSSI Calibration: Adjust RSSI calibration values in advertised beacon packets.
- PIN Restriction: PINs are now restricted to numeric characters only.
- GATT Cleanup: Removed unused GATT characteristics related to deprecated features.
- Restore Defaults: Added command to restore default configuration.
- Default Naming Update: Device MAC address is now included in names for iBeacon and Eddystone protocols. *Name Change Post-Update: Expected behavior after updates; no workaround available.
- Device Info Access: Device information characteristics are now readable without a password.
- Configurable Hibernate Timer: Added for manufacturing purposes.
- Stability Improvements: Various enhancements for better performance.
|
1.2.10.R.04
|
2023.11.30
|
- Active Sensor Selection: Users can customize their device by selecting only the sensors they require. This allows users to specify which sensor information is read and advertised, ensuring power-efficient data collection and transmission.
- 12 character name: Users can now assign names of up to 12 characters. Enabling them to configure their device with a full MAC address as the name.
- Auto-Disconnect Timer the device will disconnect from applications if not used for longer than 2 minutes without authorizing with PIN or after 10 minutes if inactive after authorizing.
- Improved pitch and roll response time to give up-to-date data.
- The device no longer restarts after changing configuration parameters.
- Other stability improvements
|
1.2.9.R.9
|
2024.02.23
|
- Battery voltage sending with iBeacon and Eddystone advertisement protocols fixed
|
1.2.9.R.8
|
2023.05.01
|
|
1.2.8.R.2
|
2022.12.14
|
- iBeacon protocol not triggering region monitoring on iOS.
- iBeacon protocol EYE devices not showing up in EYE App on Android devices running Android 13 based operating systems.
|
1.2.8.R.1
|
2022.07.21
|
- Default advertising interval increased from 1 to 5 seconds
- Other stability and consumption improvements
- Calibrated RSSI values for Eddystone and iBeacons
|
1.2.1.R.0
|
2021.11.01
|
- First base firmware release
|