FMB630 K-Line Data
Revision as of 09:12, 4 June 2018 by Linas.zaldokas (talk | contribs) (Created page with "K-Line Data monitoring functionality allows user to monitor and use incoming data from Tachograph. Kline periodic record timeout paramater is used to set interval between K-Li...")
Main Page > EOL Products > FMB630 > FMB630 Configuration > FMB630 K-Line Data
K-Line Data monitoring functionality allows user to monitor and use incoming data from Tachograph. Kline periodic record timeout paramater is used to set interval between K-Line records. Those records aren't included in standard record and will be sent as seperate packet.
To configure any K-Line parameter, every parameter should be separated with comma. For example, configuring first profile Kline Driver 2 ID by SMS, SMS should look like: “ setparam 1062 1,,,3” (“ setparam 1062 <Priority>,<HighLevel>,<LowLevel>,<generateEvent>”) Driver 2 ID do not have High/Low level so they are skipped by using comma “,,“ Other Kline properties can be configured in the same logic.
