Template:FMB0 First start card
Revision as of 14:13, 24 October 2018 by Mantas.gadliauskas (talk | contribs) (→How to insert micro SIM card into {{{model|FMB1YX}}})
GNSS/GSM/Blue-tooth tracker with GNSS/GSM antennas and internal battery
How to insert micro SIM card into FMB1YX
- Gently remove FMB1YX cover using plastic pry tool from both sides.
- Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
- Attach device cover back.
- Device is ready to be connected.
How to connect battery to FMB1YX
1. Remove FMB1YX cover.
2. Connect battery as shown to device. Position the battery in place where it does not obstruct other components.
3. Attach cover.
4. Device is ready to be connected.
How to insert SD card into FMB1YX
Insert SD card as shown.
NOTE: SD cards are only used in devices manufactured until 2018-04. Newer devices have internal flash memory.
