LV-CAN200
Revision as of 17:19, 22 November 2018 by Mantas.gadliauskas (talk | contribs)
Main Page > CAN Trackers & Adapters > LV-CAN200
LV-CAN200 is designed to acquire CAN Bus data from:
- Light vehicles (including electric cars)
- Trucks
- Buses and coaches
Access to CAN Bus data enables fleet operators to report on a wide range of information. You can effectively identify areas of improvement within their vehicle operation to drive down overheads and minimize environmental impact.
Supported vehicle data*
- Total fuel consumption
- Fuel level (Dashboard)
- Vehicle mileage
- Door status (Front left door, front right door, rear right door, rear left door, trunk cover, engine cover (hood))
- Engine speed (RPM)
- Oil pressure / level
- Engine temperature
- Vehicle speed
- Accelerator pedal position
- CNG level
- Total CNG consumption
- Engine is working on CNG
* Number of parameters depends on vehicle model, year and equipment.
Technical features
| PARAMETER | VALUE | |||
|---|---|---|---|---|
| Minimum | Typical | Maximum | Unit | |
| Supply Voltage | ||||
| Supply Voltage (Recommended Operating Conditions) | +9 | +12 | +50 | V |
| Current Consumption | ||||
| Working Mode (with 12V) | 50 | mA | ||
| Sleep Mode (with 12V) | 2 | mA | ||
| Operating Temperature | ||||
| Operating Temperature | -40 | +85 | °C | |
Adapter changes
| Software version | Program number digits | Program number in connection scheme | Notes |
|---|---|---|---|
| <= 2017-09-01 | 3 | XXX | |
| > 2017-09-01 and < 2018-01-01 | 4 | XXX → XXXX | |
| >= 2018-01-01 | 5 | XXXX → XXXXX | screw moved by 0,5 cm |