FOTA WEB Getting Started

Revision as of 04:43, 29 January 2021 by Tomas.kriauciunas (talk | contribs) (Protected "Getting Started v2" ([Edit=Allow only autoconfirmed users] (indefinite) [Move=Allow only autoconfirmed users] (indefinite)))

Main Page > Software & Applications > FOTA WEB > FOTA WEB Getting Started

Requirements

 

IMPORTANT!!! 1. All FMBXXX devices except for FMB64X should have at least 01.03.03.Rev.00 firmware version installed.
2. FMB64X should have at least 00.02.05 version installed.
3. FM36YX devices should have at least 01.12.00.Rev.02 version installed. (FM36YX Fota functionality for firmware update only)
Supported devices by family
Easy Trackers Advanced Trackers Special Trackers Professional Trackers
FM3001
FMB110
FMB122
FM36YX (Firmware Update Only)
FMB001
FMB120
FMB125
FMB640
FMB002
FMB130
FMB202
FMC640
FMB003
FMB140
FMB204
FMM640
FMB010
FMC130
FMB208

FMB020
FMM130
FMB964

FMB900
FMU130
FMC125

FMB910

FMM125

FMB910 Basic

FMT100

FMB920

FMU125

FMC001

FMU126

FMM001

MSP500

FMP100



MTB100



Please contact Teltonika's support for more information from where to download base firmware, configurator, user manual and protocols from.

Default FOTA configuration settings:

Domain: fm.teltonika.lt
Port: 5000
Period: 720 minutes (every 720 minutes device shall connect to FOTA)



Using VPN SIM cards

If your SIM cards are within Mobile Operator’s VPN (private APN), the following must be ensured and paid special attention.
1. Must ensure that domain http://fm.teltonika.lt can be resolved from within Operator’s network.
2. Following IP and ports (egress) must be allowed by the operator.

  • IP: 35.156.7.140
  • Ports:
    • 5000
    • 6000
    • 7000 (required for FM36YX models only)

When using VPN SIM cards, you should still configure http://fm.teltonika.lt domain in your configurator, not the plain IP address.

Web Access


FOTA is reached using domain address http://fm.teltonika.lt. FOTA uses HTTP ports 80 and 85 for authentication so if your network has HTTP proxy service or is blocking outgoing traffic – make sure that those two ports are added to exceptions in network proxy service and firewall.

1. Invitation for FOTA is being delivered to user e-mail. You can press „Click Here“ button or use URL provided in the e-mail. 2. After pressing the button or following URL you will be asked to write password and confirm the same password with the second verification for Your account. Make sure to follow the mentioned comments to save the password successfully. 3. Last step is logging in FOTA with your newly created account by entering e-mail address and password which you used in the creation process.

Overview


Devices tab is what you see first when logged in to FOTA. It can be divided into three distinct sections – Device section, Filter section, Navigation menu. Here is a brief rundown of each section:


Device section

This area provides a basic overview of individual or filtered devices while allowing single or multiple selections for ACTIONS afterward.


Filter section

Filter provides means to easily access devices that you need by combining different filters: Company, device Model, Firmware, and more.


Navigation menu

Different FOTA tabs for complete management of registered Devices, Companies, and users.


Next chapter Devices