Template:SAS device Parameter list - System
Revision as of 12:31, 8 March 2023 by Martyna.D (talk | contribs) (Protected "Template:SAS device Parameter list - System" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)))
System parameters
System Settings
Parameter ID | Parameter Type | Default value | Value range | Value | Parameter name | |
---|---|---|---|---|---|---|
Min | Max | |||||
138 | Uint8 | 1 | 0 | 2 | 0 – Ignition | Movement Source |
1 – Accelerometer | ||||||
2 – GNSS | ||||||
3 – CAN speed | ||||||
133 | Uint8 | 0 | 0 | 1 | 0 – GNSS | Speed Source |
1 – CAN | ||||||
107 | Uint8 | 2 | 0 | 2 | 0 – After Position Fix | Records Saving/Sending without TS |
1 – Always | ||||||
2 – After Time Sync | ||||||
123 | Uint8 | 0 | 0 | 1 | 0 – Disable | PDOP filter |
1 – Enable | ||||||
124 | Uint16 | 0,7 | 0 | 99 | - | PDOP filter Threshold |
108 | Uint8 | 1 | 0 | 1 | 0 – Disable | LED indication |
1 – Enable | ||||||
109 | Uint8 | 10 | 1 | 15 | 0 – Undefined | GNSS source |
1 – Beidou only | ||||||
2 – Glonass only | ||||||
3 – Glonass and Beidou not allowed | ||||||
4 – Galileo only | ||||||
5 – Galileo and Beidou | ||||||
6 – Galileo and Glonass | ||||||
7 – Galileo, Glonass and Beidou not allowed | ||||||
8 – Gps only | ||||||
9 – Gps and Beidou | ||||||
10 – Gps and Glonass | ||||||
11 – Gps, Glonass and Beidou not allowed | ||||||
12 – Gps and Galileo | ||||||
13 – Gps, Galileo and Beidou | ||||||
14 – Gps, Galileo and Glonass | ||||||
15 – Gps, Galileo, Glonass and Beidou and not allowed | ||||||
111 | Uint8 | 1 | 0 | 1 | 0 – Range 15V | Analog Input Value Range |
1 – Range 150V | ||||||
113 | Uint8 | 1 | 0 | 1 | 0 – Codec 8 | Data Protocol |
1 – Codec 8 Extended | ||||||
110 | Uint8 | 0 | 0 | 1 | 0 – On need | Battery Charge Mode |
1 – After Ignition ON | ||||||
2 – Always | ||||||
114 | Uint8 | 1 | 0 | 1 | 0 – Disable | Power On By USB/Charger |
1 – Enable | ||||||
131 | Uint8 | 10 | 5 | 10 | 5 – Digital Input 3 + Digital Input 4 | Input/Output Mode |
6 – Digital Output 1 + Digital Input 4 | ||||||
9 – Digital Input 3 + Digital Output 2 | ||||||
10 – Digital Output 1 + Digital Output 2 |
Parameter ID | Parameter Type | Default value | Value range | Value | Parameter name | |
---|---|---|---|---|---|---|
Min | Max | |||||
106 | Uint8 | 1 | 0 | 1 | 0 – Disable | Static navigation |
1 – Enable | ||||||
112 | Uint8 | 0 | 0 | 1 | 0 – Movement Source | Static Navigation Source |
1 – Ignition Source |
Sleep Mode
Parameter ID | Parameter Type | Default value | Value range | Value | Parameter name | |
---|---|---|---|---|---|---|
Min | Max | |||||
102 | Uint8 | 2 | 0 | 4 | 0 – Disable | Sleep settings |
1 – GPS sleep | ||||||
2 – Deep sleep | ||||||
3 – Online Deep sleep | ||||||
4 – Ultra sleep | ||||||
132 | Uint8 | 2 | 0 | 2 | 0 - Movement only | Sleep Exit Source |
1 - Alarm button only | ||||||
2 - Movement + Alarm button | ||||||
103 | Uint16 | 1 | 1 | 3000 | Minutes | Timeout |
Ignition Source
Parameter ID | Parameter Type | Default value | Value range | Value | Parameter name | |
---|---|---|---|---|---|---|
Min | Max | |||||
104 | Uint8 | 30000 | 13200 | 100000 | mV | High Voltage |
105 | Uint8 | 13200 | 0 | 30000 | mV | Low Voltage |
101 | Uint16 | 2 | 1 | 103 | 1 - DIN1 | Low Voltage |
2 - Accelerometer | ||||||
3 - DIN1 + Accelerometer | ||||||
4 - Power Voltage | ||||||
5 - DIN1 + Power Voltage | ||||||
6 - Accelerometer + Power Voltage | ||||||
7 - DIN1 + Accelerometer + Power Voltage | ||||||
32 - DIN3 | ||||||
33 - DIN1 + DIN3 | ||||||
34 - Accelerometer + DIN3 | ||||||
35 - DIN1 + Accelerometer + DIN3 | ||||||
36 - Power Voltage + DIN3 | ||||||
37 - DIN1 + Power Voltage + DIN3 | ||||||
38 - Accelerometer + Power Voltage + DIN3 | ||||||
39 - DIN1 + Accelerometer + Power Voltage + DIN3 | ||||||
64 - DIN4 | ||||||
65 - DIN1 + DIN4 | ||||||
66 - Accelerometer + DIN4 | ||||||
67 - DIN1 + Accelerometer + DIN4 | ||||||
68 - Power Voltage + DIN4 | ||||||
69 - DIN1 + Power Voltage + DIN4 | ||||||
70 - Accelerometer + Power voltage + DIN4 | ||||||
71 - DIN1 + Accelerometer | ||||||
96 - DIN3 + DIN4 | ||||||
97 - DIN1 + DIN3 + DIN4 | ||||||
98 - Accelerometer + DIN3 + DIN4 | ||||||
99 - DIN1 + Accelerometer + DIN3 + DIN4 | ||||||
100 - Power Voltage + DIN3 + DIN4 | ||||||
101 - DIN1 + Power Voltage + DIN3 + DIN4 | ||||||
102 - Accelerometer + Power Voltage + DIN3 + DIN4 | ||||||
103 - DIN1 + Accelerometer + Power Voltage + DIN3 + DIN4 |
Accelerometer Delay Settings
Parameter ID | Parameter Type | Default value | Value range | Value | Parameter name | |
---|---|---|---|---|---|---|
Min | Max | |||||
19001 | Uint16 | 5 | 1 | 60 | Seconds | Movement Start Delay |
19002 | Uint16 | 60 | 5 | 300 | Seconds | Movement Stop Delay |
Time Synchronization
Parameter ID | Parameter Type | Default value | Value range | Value | Parameter name | |
---|---|---|---|---|---|---|
Min | Max | |||||
901 | Uint8 | 3 | 0 | 24 | Hours | NTP Resync |
902 | Char | "avl1.teltonika.lt" | 0 | 55 | String | NTP server 1 |
903 | Char | "pool.ntp.org" | 0 | 55 | String | NTP server 2 |
Accelerometer Auto Calibration
Parameter ID | Parameter Type | Default value | Value range | Value | Parameter name | |
---|---|---|---|---|---|---|
Min | Max | |||||
169 | Uint16 | 2 | 0 | 2 | 0 - Disabled | Accelerometer Auto Calibration |
1 - Once | ||||||
2 - Continuous | ||||||
170 | Uint16 | 1 | 0 | 1 | 0 - Disable | Gravity Filter |
1 - Enable |
Tracking Mode
Parameter ID | Parameter Type | Default value | Value range | Value | Parameter name | |
---|---|---|---|---|---|---|
Min | Max | |||||
909 | Uint8 | 0 | 0 | 1 | 0 - Performance | Power Saving mode |
1 - Low Power | ||||||
905 | Uint16 | 1.3 | 0.1 | 5 | Value | GPS accuracy: HDOP PDOP VDOP |
906 | Uint16 | 5 | 4 | 255 | Value | GPS Satellites Quantity |
Timestamp Backup
Parameter ID | Parameter Type | Default value | Value range | Value | Parameter name | |
---|---|---|---|---|---|---|
Min | Max | |||||
140 | Uint8 | 0 | 0 | 1 | 0 – Disable | Timestamp Backup |
1 – Enable |