| VERSION
|
RELEASE DATE
|
CONFIGURATOR CHANGES
|
FIRMWARE CHANGES
|
|---|
55.01.02.Rev.01
1.6.11_R.30
|
2021.11.03
|
- Changed SMS Timezone label.
- GNSS source parameter mask changed to allow only valid GNSS modes.
- Changed scooter speed limits IOs high/low ranges and default values.
- Added Segway Cable Lock I/O elements.
- Changed unauthorized movement buzzer control default values.
|
- SMS commands updated. Commands will return time with time zone applied.
- Added Segway wired lock support.
- Movement detection tracking fixed.
- For GNSS source parameter only available values can be set.
- Fixed Unauthorized Movement event SMS sending.
- Fixed record generation with correct AVL ID for Unauthorized Movement.
|
|---|
55.00.22.Rev.00
1.6.11_R.27
|
2021.08.23
|
- Changed GNSS source parameter mask to allow only valid GNSS modes.
- Changed scooter speed limits IOs high/low ranges and default values.
- Changed Data Acquisition tool tips and labels.
- Added Falldown auto calibration parameter.
- Added Unauthorized movement functionality.
- Added Last known position parameter.
|
- Fixed GPS automatic always ON at the start.
- Updated function to wake up the device if it is moved during "Data sending state".
- Fixed I/O Sleep mode element to send an event messages on entering the mode.
- Added Last known position parameter.
- Added pulsedigout command with on/off timeouts in ms and repeats.
- Fixed GNSS Fix status always on after changing GNSS source.
- Updated restricted I/Os by scooter model and fixed battery lock status value.
- Added Unauthorized movement functionality.
- Added Falldown auto calibration support for TST100.
- Changed Battery value SMS text format changed to unsigned int.
- Added Segway MAX autodetection and MC FW update.
- Added Segway ES autodetection and MC FW update.
- Fixed periodic data record generation in order to avoid skipping.
- Updated Segway ES2/4 FW (ESC 4.0.5).
- Added a time guard if BLE scan job is stuck.
- Fixed Unauthorized Movement event SMS sending.
- Fixed record generation with correct AVL ID for Unauthorized Movement.
- Fixed ext voltage value representation in battery SMS command response.
- Fixed scooter speed limits IOs hi/lo ranges check.
- Fixed unauthorized movement buzzer control using default values.
|
|---|
55.00.14.Rev.00
1.6.11_R.19
|
2021.02.03
|
- Added Baudrate options.
- Added Battery lock status Scooter IO element.
|
- Added battery percentage value to the SMS.
- Increased compatible beacons count from 25 to 100.
- Fixed memory leak, when the GPS module is turned on and off frequently.
- Changed scooters' IOs filtering depending on protocol.
- Fixed locking behavior during ride.
- Improved Movement detection.
- Segway MAX MC FW was updated to 21.1.0.
- Added Baudrate options.
- Fixed temperature and FW version reading in FitRider e-kick scooters.
- Fixed speed limit function. Added command scsetspdlimt2s for FitRider T2s e-kick scooters.
- Added debug option for sending/receiving FitRider data packets.
- Segway MAX scooters locking sequence changed: when scooter is moving and command to lock the scooter was received, the engine is turned off and after the scooter is fully stopped it is locked.
- Added Battery Lock control command and Battery lock status IO element.
|
|---|
55.00.09.Rev.08
1.6.11_R.14
|
2020.10.16
|
- Updated scooter's FW rendering in E-Scooter I/O panel from DEC to HEX;
- Added permanent link with server feature;
- Removed accelerometer's autocalibration parameter;
- Added 3 new I/O parameters - Normal/Eco/Sport speed limit;
- Added BT Status I/O parameter;
|
- Improved BLE lock functionality;
- Added 3 new I/O parameters - Normal/Eco/Sport speed limit;
- Updated Segway MAX kick e-scooter's MC FW version checking functionality;
- Updated scgetbtcode and sclookfor commands;
- Added BT Status I/O parameter;
- Updated Segway MAX MC and BMS FW versions to 21.0.7 and 3.5.6 correspondingly;
- Removed Segway scooter's model detection based on serial number. Make sure to always select the correct scooter's protocol!
- Added SMS/GPRS command for packet's logging - scdbg <arg>; <arg> = 1 - enable, 0 - disable;
- Updated scbuzzerctrl command functionality with Xiaomi kick e-scooter;
- Updated battery overheat detection.
|
|---|
55.00.09.Rev.1
1.6.11_R.8
|
2020.06.16
|
- Added permanent link with the server feature
- Implemented Solebe Y905 Bluetooth lock feature with required parameters (Lock status, Lock battery)
- Minor changes
|
- Implemented permanent link with server functionality;
- Added Solebe Y905 Bluetooth lock support;
- Minor changes;
|
|---|