Default Parameters Values Update
Revision as of 12:36, 2 October 2023 by Airidas.S (talk | contribs) (→Default Parameters Values Update)
Default Parameters Values Update
Starting from firmware 03.29.00.Rev.04 default values of some parameters is updated to provide more comfortable solution for clients List of changes:
| Name | Default value in 03.27.XX firmware versions | Default value in 03.29.XX firmware versions |
| Parameter ID 102 - (Sleep Mode / Sleep Settings) | 2 - (Deep Sleep) | 3 - (Online Deep Sleep) |
| Parameter ID 103 - (Sleep Mode / Sleep Timeout (minutes)) | 1440 | 120 |
| Parameter ID 234 - (Assisted GPS Settings / Allow AGPS in Home Network) | 1 - (Enable) | 0 - (Disabled) |
| Parameter ID 11004 - (Eco/Green Driving / Max Acceleration (m/s^2)) | 2.50 | 2.31 |
| Parameter ID 11005 - (Eco/Green Driving / Max Braking (m/s^2)) | 2.70 | 2.52 |
| Parameter ID 11006 - (Eco/Green Driving / Max Cornering (rad/s)) | 3.40 | 2.94 |
| Parameter ID 11502 - (Unplug Detection / Unplug Detection Mode) | 0 - (Simple) | 1 - (Advanced) |
| Parameter ID 11407 - (Crash Detection / Duration (ms)) | 20 | 10 |
| Parameter ID 11406 - (Crash Detection / Crash Trace) | 0 - (Disable) | 2 - (Trace Full) |
| Parameter IDs 20101,20121,20141, etc - (Manual Geofence / X geozone / Generate Event) | 0 - (No Event) | 3 - (On Both) |
| Parameter ID 11816 - (BT 4.0 / Scan retries until error (seconds)) | 30 | 10 |
| Parameter ID 11120 - (CAN Adapter / Program number) | 0 | 11120 |
| Parameter ID 11661 - (Towing / Data Acquisition Change) | 0 - (None) | 1 - (Low) |
| Parameter ID 40280 - (OBDII / Fuel Level / Priority) | 0 - (None) | 1 - (Low) |
| Parameter ID 40410 - (OBDII / VIN / Priority) | 0 - (None) | 1 - (Low) |
| Parameter ID 40440 - (OBDII / OEM Fuel Level / Priority) | 0 - (None) | 1 - (Low) |
| Parameter ID 40430 - (OBDII / OEM Total Mileage / Priority) | 0 - (None) | 1 - (Low) |
| Parameter ID 40420 - (OBDII / Fault Codes / Priority) | 0 - (None) | 1 - (Low) |
| Parameter ID 40410 - (OBDII / Number of DTC / Priority) | 0 - (None) | 1 - (Low) |
| Parameter ID 40400 - (OBDII / Fuel Rate / Priority) | 0 - (None) | 1 - (Low) |
| Parameter ID 40160 - (OBDII / Engine RPM / Priority) | 0 - (None) | 1 - (Low) |
| Parameter ID 40170 - (OBDII / Vehicle Speed / Priority) | 0 - (None) | 1 - (Low) |
| Parameter ID 40110 - (OBDII / Engine Load / Priority) | 0 - (None) | 1 - (Low) |
| Parameter ID 40370 - (OBDII / Hybrid battery pack remaining life / Priority) | 0 - (None) | 1 - (Low) |
| Parameter ID 40120 - (OBDII / Coolant Temperature / Priority) | 0 - (None) | 1 - (Low) |
| Parameter ID 40230 - (OBDII / Distance traveled MIL on / Priority) | 0 - (None) | 1 - (Low) |
Review all parameter setting in https://wiki.teltonika-gps.com/view/FMB920_Parameter_list