Configuration password

How to set configuration password with TCT

To set the password, open the "System" tab, then "Configuration password" and click the "Set password" button.

After that the next window will be opened:

Password window

Password window with set password

The password must fulfil several requirements:

1.A password must contain between 4 to 10 characters;

2.Symbols are not allowed (for example: "." "/" "@" "@" "!");

3.Passwords must match;

After each of the conditions is fulfilled, the corresponding field will be marked with a green tick. Press button "Set" to set password for the configuration.

After

Upload configuration file with password set to the device without password

Once the configuration with password has been downloaded to the device, the following options will be available on the "System" tab of the "Configuration password" field:

Password save to the device

1. "Change password" - to change the current configuration password;

2. "Disable password" - to remove the password from the configuration.

If the configuration with password is saved on the device, the user will see the following message:

After that, the user will be required to enter the password each time user tries to download the configuration from the device.