Configuration password

How to set configuration password with TCT

To set the password, open the "System" tab, then "Configuration password" and click the "Set password" button.

After that the next window will be opened:

Password window

Password window with set password

The password must fulfil several requirements:

1.A password must contain between 4 to 10 characters;

2.Symbols are not allowed (for example: "." "/" "@" "@" "!");

3.Passwords must match;

After each of the conditions is fulfilled, the corresponding field will be marked with a green tick. Press button "Set" to set password for the configuration.

After

How to connect to the devices with password

Enter password window

Wrong password was entered

After clicking on the "Configure" button, a window will appear in which it is necessary to enter the password set for configuration and press the "Enter" button.

If an incorrect password is entered, the TCT will inform you with the text "Wrong password". It will also show the number of remaining attempts. The total number of attempts is 5. After they are exhausted, the device will be blocked.

Upload configuration file with password set to the device without password

Password save to the device

Once the configuration with password has been downloaded to the device, the following options will be available on the "System" tab of the "Configuration password" field:

1. "Change password" - to change the current configuration password;

2. "Disable password" - to remove the password from the configuration.

If the configuration with password is saved on the device, the user will see the following message:

After that, the user will be required to enter the password each time user tries to download the configuration from the device.