Indicator Display Icons

Main Page > Video Solutions > Teltonika ADAS > Indicator Display Icons

Indicator Display

Indicator Display for ADAS
	Left Turn Signal The left under bar blinks when the left turn signal is active at 0km/h.	Right Turn Signal The right under bar blinks when the right turn signal is active at 0km/h.
	LDW Active LDW is enabled.	LDW Unavailable LDW is not active.
	Left Departure Alert When the vehicle departs the left lane.	Right Departure Alert When the vehicle departs the right lane.
	Front Vehicle Detection When the vehicle ahead is in the host vehicle’s lane.	Forward Collision Warning Indicates impending collision with the vehicle ahead
	Pedestrian Collision Warning Indicates impending collision with a pedestrian.	Pedestrian Detection Displayed when a pedestrian is detected ahead.
	Recording without voice DVR function is working and voice is not being recorded.	Recording with voice DVR function is working and voice is being recorded.
	Camera Connection Error Camera connection is not good. Contact your local distributor/installer.	CAN Communication Error CAN Communication has a problem. Contact your local distributor/installer.
	Camera View Block Error The camera is covered by something. Remove something blocking camera vision.	Low Visibility Indication The performance of ADAS might be limited under the inclement weather condition.

Indicator Display for ADAS Plus
	Booting Mode ADAS is turning on.	Driving Mode Default mode when ADAS is turned on.
	Left Turn Signal The left under bar blinks when the left turn signal is active at 0km/h.	Right Turn Signal The right under bar blinks when the right turn signal is active at 0km/h.
	LDW Active LDW is enabled.	LDW Unavailable LDW is not active.
	Left Departure Alert When the vehicle departs the left lane.	Right Departure Alert When the vehicle departs the right lane.
	Front Vehicle Detection When the vehicle ahead is in the host vehicle’s lane.	Forward Collision Warning Indicates impending collision with the vehicle ahead
	Pedestrian Collision Warning Indicates impending collision with a pedestrian.	Pedestrian Detection Displayed when a pedestrian is detected ahead.
	Forward Proximity Warning Front vehicle is within the range of FPW warning settings	Forward Collision Warning icon Collision with front vehicle is impending.
	Pedestrian Collision Warning icon Collision with pedestrian is impending.	Speed Limit Detection icon Speed limit sign is detected
	Camera Connection Error Camera connection is not good. Contact your local distributor/installer.	CAN Communication Error CAN Communication has a problem. Contact your local distributor/installer.
	Camera View Block Error The camera is covered by something. Remove something blocking camera vision.	Low Visibility Indication The performance of ADAS might be limited under the inclement weather condition.
	Indicator communication error	SD card error The SD card cannot be read. Please check if it is inserted or is not corrupted.

Indicator Settings

Display Turning On: Press the center button.

Display Turning Off: Press the center button until the display turns off. (Even if the display turns off, it gives a warning sound)


Indicator Settings for ADAS
	1) Working Mode When it turns on, working mode operates. Volume control is available, when indicator is in the working mode. Press the (-) button repeatedly to decrease the volume, press the (+) button repeatedly to increase the volume.	2) Brightness Control Mode Press the center button once it changes to brightness control mode. Press the (-) and (+) button to decrease or increase the brightness level and save the new settings. The brightness level appears in numbers. Press the center button again, it goes to left LDW sensitivity control mode. If there is no button operation for 5 seconds, it returns to working mode. There are five available levels(1-5).
	3) Left LDW Sensitivity Control Mode Press the center button once it changes to left LDW sensitivity control mode. Press the (-) and (+) button to decrease or increase the left LDW sensitivity and save the new settings. The left LDW sensitivity level appears in numbers. Press the center button again, it goes to Right LDW sensitivity control mode. If there is no button operation for 5 seconds, it returns to working mode. There are five available levels(1-5).	4) Right LDW Sensitivity Control Mode Press the center button once it changes to Right LDW sensitivity control mode. Press the (-) and (+) button to decrease or increase the right LDW sensitivity and save the new settings. The right LDW sensitivity level appears in numbers. Press the center button again, it goes to FCW sensitivity control mode. If there is no button operation for 5 seconds, it returns to working mode. There are five available levels(1-5).
	5) FCW Sensitivity Control Mode Press the center button once it changes to FCW sensitivity control mode. Press the (-) and (+) button to decrease or increase the FCW sensitivity and save the new settings. The FCW sensitivity level appears in numbers. Press the center button again, it goes to SDA sensitivity control mode. If there is no button operation for 5 seconds, it returns to working mode. There are five available levels(1-5).	6) SDA Sensitivity Control Mode Press the center button once it changes to SDA sensitivity control mode. Press the (-) and (+) button to decrease or increase the SDA sensitivity and save the new settings. The SDA sensitivity level appears in numbers. Press the center button again, it goes to FPW sensitivity control mode. If there is no button operation for 5 seconds, it returns to working mode. There are five available levels(1-5).
	7) FPW Sensitivity Control Mode Press the center button once it changes to FPW sensitivity control mode. Press the (-) and (+) button to decrease or increase the FPW sensitivity and save the new settings. The FPW sensitivity level appears in numbers. Press the center button again, it goes to Volume control mode. If there is no button operation for 5 seconds, it returns to working mode. There are three available levels(1-3).	8) Volume Control Mode Press the center button once it changes to volume control mode. Press the (-) and (+) button to decrease or increase the volume and save the new settings. The volume level appears in numbers. Press the center button again, it goes to working mode. If there is no button operation for 5 seconds, it returns to working mode. There are five available levels(1-5).

Indicator Settings for ADAS plus
	1) Working Mode When it turns on, working mode operates. Volume control is available, when indicator is in the working mode. Press the (-) button repeatedly to decrease the volume, press the (+) button repeatedly to increase the volume.	2) Brightness Control Mode Press the center button once it changes to brightness control mode. Press the (-) and (+) button to decrease or increase the brightness level and save the new settings. The brightness level appears in numbers. Press the center button again, it goes to left LDW sensitivity control mode. If there is no button operation for 5 seconds, it returns to working mode. There are five available levels(1-5).
	3) Left LDW Sensitivity Control Mode Press the center button once it changes to left LDW sensitivity control mode. Press the (-) and (+) button to decrease or increase the left LDW sensitivity and save the new settings. The left LDW sensitivity level appears in numbers. Press the center button again, it goes to Right LDW sensitivity control mode. If there is no button operation for 5 seconds, it returns to working mode. There are five available levels(1-5).	4) Right LDW Sensitivity Control Mode Press the center button once it changes to Right LDW sensitivity control mode. Press the (-) and (+) button to decrease or increase the right LDW sensitivity and save the new settings. The right LDW sensitivity level appears in numbers. Press the center button again, it goes to FCW sensitivity control mode. If there is no button operation for 5 seconds, it returns to working mode. There are five available levels(1-5).
	5) FCW Sensitivity Control Mode Press the center button once it changes to FCW sensitivity control mode. Press the (-) and (+) button to decrease or increase the FCW sensitivity and save the new settings. The FCW sensitivity level appears in numbers. Press the center button again, it goes to SDA sensitivity control mode. If there is no button operation for 5 seconds, it returns to working mode. There are five available levels(1-5).	6) SDA Sensitivity Control Mode Press the center button once it changes to SDA sensitivity control mode. Press the (-) and (+) button to decrease or increase the SDA sensitivity and save the new settings. The SDA sensitivity level appears in numbers. Press the center button again, it goes to FPW sensitivity control mode. If there is no button operation for 5 seconds, it returns to working mode. There are five available levels(1-5).
	7) FPW Sensitivity Control Mode Press the center button once it changes to FPW sensitivity control mode. Press the (-) and (+) button to decrease or increase the FPW sensitivity and save the new settings. The FPW sensitivity level appears in numbers. Press the center button again, it goes to Volume control mode. If there is no button operation for 5 seconds, it returns to working mode. There are three available levels(1-3).	8) Volume Control Mode Press the center button once it changes to volume control mode. Press the (-) and (+) button to decrease or increase the volume and save the new settings. The volume level appears in numbers. Press the center button again, it goes to working mode. If there is no button operation for 5 seconds, it returns to working mode. There are five available levels(1-5).
	9) Voice Recording Control Mode Press the (-) button for 3 seconds, then it enters voice recording control mode. Two options (On/Off) are available. Press the (-) and (+) button to select each option and the center button to save new settings. If there is no button operation for 5 seconds, it returns to driving mode.	10) SLR Sensitivity Control Mode Press the center button once, then it changes to SLR sensitivity control mode. Five levels (0, 5, 10, 15, 20) are available. Press the (-) and (+) button to decrease or increase the SLR sensitivity and save new settings. Press the center button again, then it goes to volume control mode. If there is no button operation for 5 seconds, it returns to driving mode.