Changes

[[Image:Fmb120_bt_odbii_settings.png|300px|right]]

[[Image:Fmb120_bt_odbii_settings.png|300px|right]]

Following are the instructions on how to easily prepare Bluetooth Dongle connection to the {{{model|FMB}}} device. First we need to configure {{{model|FMB}}} device Bluetooth settings. These are the required steps:

Following are the instructions on how to easily prepare Bluetooth Dongle connection to the {{{model_2|FMB}}} device. First we need to configure {{{model_2|FMB}}} device Bluetooth settings. These are the required steps:

* Go to <span style=color:#F6A83E>Bluetooth</span> section similarly to as shown in the figure to the right (position 1).

* Go to <span style=color:#F6A83E>Bluetooth</span> section similarly to as shown in the figure to the right (position 1).

* Turn on BT Radio by pressing <span style=color:#F6A83E>Enable (visible)</span> (position 2). "Local name" (position 3) will automatically be "{{{model|FMB1YX}}}_last 7 imei digits", you can leave it or type your own name.

* Turn on BT Radio by pressing <span style=color:#F6A83E>Enable (visible)</span> (position 2). "Local name" (position 3) will automatically be "{{{model|FMB1YX}}}_last 7 imei digits", you can leave it or type your own name.

* After all these steps press <span style=color:#F6A83E>Save to device</span> to save configuration (position 8 in the top right hand figure).

* After all these steps press <span style=color:#F6A83E>Save to device</span> to save configuration (position 8 in the top right hand figure).

* Now you can disconnect {{{model|FMB}}} device from the configurator.

* Now you can disconnect {{{model_2|FMB}}} device from the configurator.

===Connecting to Bluetooth OBD II dongle===

===Connecting to Bluetooth OBD II dongle===

----

----

After this configuration OBDII dongle can be connected to {{{model|FMB}}} device. Turn on ignition, then turn on its Bluetooth connection. For pairing follow dongle instructions. OBDII device notification about paired Bluetooth connection depends on the specific model. If you later restart {{{model|FMB}}} device it will automatically reconnect to this dongle.

After this configuration OBDII dongle can be connected to {{{model_2|FMB}}} device. Turn on ignition, then turn on its Bluetooth connection. For pairing follow dongle instructions. OBDII device notification about paired Bluetooth connection depends on the specific model. If you later restart {{{model_2|FMB}}} device it will automatically reconnect to this dongle.

===Supported Bluetooth OBD II dongles===

===Supported Bluetooth OBD II dongles===

----

----

{{{model|FMB}}} module works with Bluetooth OBD II dongles which are based on ELM327 or STN1110 chips.<br/>Comparison of these chips is presented in the image below:

{{{model_2|FMB}}} module works with Bluetooth OBD II dongles which are based on ELM327 or STN1110 chips.<br/>Comparison of these chips is presented in the image below:

[[Image:Elm317_stn1110_comp.png|400px|none]]

[[Image:Elm317_stn1110_comp.png|400px|none]]