Changes

[[Image:Fmb120_bt_odbii_settings.png|300px|right]]

[[Image:Fmb120_bt_odbii_settings.png|300px|right]]

Following are the instructions on how to easily prepare Bluetooth Dongle connection to the FMB device. First we need to configure FMB device Bluetooth settings. These are the required steps:

Following are the instructions on how to easily prepare Bluetooth Dongle connection to the {{{model|FMB}}} device. First we need to configure {{{model|FMB}}} device Bluetooth settings. These are the required steps:

* Go to <span style=color:#F6A83E>Bluetooth</span> section similarly to as shown in the figure to the right (position 1).

* Go to <span style=color:#F6A83E>Bluetooth</span> section similarly to as shown in the figure to the right (position 1).

* Turn on BT Radio by pressing <span style=color:#F6A83E>Enable (visible)</span> (position 2). "Local name" (position 3) will automatically be "{{{model|FMB1YX}}}_last 7 imei digits", you can leave it or type your own name.

* Turn on BT Radio by pressing <span style=color:#F6A83E>Enable (visible)</span> (position 2). "Local name" (position 3) will automatically be "{{{model|FMB1YX}}}_last 7 imei digits", you can leave it or type your own name.

* After all these steps press <span style=color:#F6A83E>Save to device</span> to save configuration (position 8 in the top right hand figure).

* After all these steps press <span style=color:#F6A83E>Save to device</span> to save configuration (position 8 in the top right hand figure).

* Now you can disconnect FMB device from the configurator.

* Now you can disconnect {{{model|FMB}}} device from the configurator.

===Connecting to Bluetooth OBD II dongle===

===Connecting to Bluetooth OBD II dongle===

----

----

After this configuration OBDII dongle can be connected to FMB device. Turn on ignition, then turn on its Bluetooth connection. For pairing follow dongle instructions. OBDII device notification about paired Bluetooth connection depends on the specific model. If you later restart FMB device it will automatically reconnect to this dongle.

After this configuration OBDII dongle can be connected to {{{model|FMB}}} device. Turn on ignition, then turn on its Bluetooth connection. For pairing follow dongle instructions. OBDII device notification about paired Bluetooth connection depends on the specific model. If you later restart {{{model|FMB}}} device it will automatically reconnect to this dongle.

===Supported Bluetooth OBD II dongles===

===Supported Bluetooth OBD II dongles===

----

----

FMB module works with Bluetooth OBD II dongles which are based on ELM327 or STN1110 chips.<br/>Comparison of these chips is presented in the image below:

{{{model|FMB}}} module works with Bluetooth OBD II dongles which are based on ELM327 or STN1110 chips.<br/>Comparison of these chips is presented in the image below:

[[Image:Elm317_stn1110_comp.png|400px|none]]

[[Image:Elm317_stn1110_comp.png|400px|none]]