Changes

<b>{{{model|FMB20X}}} Small and professional waterproof tracker with high gain {{{GPS_antenna|internal}}} {{{antenna|GNSS/GSM antennas}}}, Blue-tooth and high capacity internal {{{battery|Ni-MH}}} battery</b>{{{pic|[[Image:FMB202.png|400px|right]]}}}

<b>{{{model|FMB20X}}} Small and professional waterproof tracker with high gain {{{GPS_antenna|internal}}} {{{antenna|GNSS/GSM antennas}}}, Bluetooth and high capacity internal {{{battery|Ni-MH}}} battery</b>{{{pic|[[Image:FMB202.png|400px|right]]}}}

=='''How to insert Micro-SIM card'''==

=='''How to insert Micro-SIM card'''==

# Unscrew the '''screws'''.

# '''Unscrew''' 6 screws counter-clockwise that are located on the '''bottom''' of the device.

# Remove the '''cover'''.

# Remove the '''cover'''.

# Insert '''Micro-SIM''' card as shown with '''PIN request disabled''' or read  '''{{{sim_pin|[[FMB202 Security info|Security info]]}}}''' how to enter it later in '''Configurator'''. Make sure that Micro-SIM card '''cut-off corner''' is pointing forward to slot.  

# Insert '''Micro-SIM''' card as shown with '''PIN request disabled''' or read  '''{{{sim_pin|[[FMB204 Security info|Security info]]}}}''' how to enter it later in '''Configurator'''. Make sure that Micro-SIM card '''cut-off corner''' is pointing forward to slot.  

# Connect battery as shown to device. Position the battery in place where it does '''not obstruct other components'''.

# Connect battery as shown to device.

# Attach device '''cover''' and put the '''screws''' back in.

# After configuration, attach device '''cover''' and put the '''screws''' back in.

# Device is ready to be connected.  

# Device is ready to be connected.  

[[Image:case7.png|300px]][[Image:case4.png|300px]][[Image:case2.png|300px]]  

[[Image:case7.png|250px]][[Image:case4.png|250px]][[Image:case2.png|250px]] <br>

[[Image:case5.png|300px]][[Image:case3.png|300px]][[Image:case6.png|300px]]

[[Image:case5.png|250px]][[Image:case3.png|250px]][[Image:case6.png|250px]]