Changes

Undo revision 33686 by Mariusandruska (talk)
Line 11: Line 11:  
=='''How to insert Micro-SIM card'''==
 
=='''How to insert Micro-SIM card'''==
   −
*Insert Micro-SIM card as shown with PIN request disabled or
+
# Gently remove {{{model|FMB9YX}}} '''cover''' using '''plastic pry tool''' from both sides.
read our Wiki how to enter PIN later in Teltonika
+
# Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[FMB900 Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing forward to slot.
Configurator. Make sure that Micro-SIM card cut-off corner is
+
# Attach device '''cover''' back.
pointing forward to slot.
+
# Device is ready to be connected.
*Connect battery as shown to device.
  −
*Connect micro usb cable as shown
  −
*To power up TST100, connect green plug to the E-scooter
  −
*Open Teltonika configurator, select TST100 device and
  −
configure it according to your requirements (how to install
  −
drives on page
  −
*Once all done, disconnect TST100 from PC and E-scooter. Attach
  −
the lid by two screws as shown
      
[[Image:Fmb920_cover_1.png|280px]][[Image:Fmb920_cover_2.png|280px]][[Image:Fmb920_cover_3.png|280px]][[Image:Fmb920_cover_4.png|280px]]
 
[[Image:Fmb920_cover_1.png|280px]][[Image:Fmb920_cover_2.png|280px]][[Image:Fmb920_cover_3.png|280px]][[Image:Fmb920_cover_4.png|280px]]