2,232 bytes added
, 04:21, 26 March 2020
[[Image:MSP500_teltonika.PNG|centre]]
<b>{{{description|MSP500 is a special tracking terminal contains an integrated buzzer and a relay for a speed limiting functionality based on a fuel pump power supply switching.}}}</b>{{{pic|[[Image:MSP500 man.png|400px|right]]}}}
__TOC__
=='''How to insert {{{sim_type|Micro-}}}SIM card {{{battery|and connect the battery}}}'''==
# Gently remove {{{model|MSP500}}} '''cover''' using '''plastic pry tool''' from both sides.{{{properly_open|<p><b>Note:</b> To properly open a new case please watch this [https://youtu.be/PBXVNXfRjg0 video].</p>}}}
# Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read '''[[{{{model|MSP500}}} Security info|Security info]]''' how to enter it later in [[Teltonika Configurator]]. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing forward to slot. {{{dual_sim|'''SIM slot 1''' is closer to PCB, '''SIM slot 2''' is the upper one.}}}
{{{be_battery|# Connect '''battery''' as shown to device. Position the battery in place where it does not obstruct other components.
# After '''configuration''', see “'''[[{{{model|MSP500}}}_First_Start#PC Connection (Windows)|PC Connection (Windows)]]'''”, attach device '''cover''' back.}}}
Device is ready to be installed.
[[Image:{{{sim_insert_pic1|Fmb120_cover_1.png}}}|260px]][[Image:{{{sim_insert_pic2|Fmb120_cover_2.png}}}|260px]][[Image:{{{sim_insert_pic3|Fmb120_cover_3.png}}}|260px]][[Image:{{{sim_insert_pic4|Fmb120_cover_4.png}}}|260px]]
{|
|-
| [[File:Alert.png|left|link=]] || <b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage {{{battery|and internal battery}}} disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b>
|}
{{{microsd_insert|
=='''How to insert microSD card'''==
# Push microSD card lock case.
# Open microSD card locker.
# Correctly insert microSD card into slot.
# Close microSD card locker.
# Push microSD card lock case to locked position.
[[Image:Sd_card_1.png|x150px]] [[Image:Sd_card_2.png|x150px]] [[Image:Sd_card_3.png|x150px]] [[Image:Sd_card_4.png|x150px]] [[Image:Sd_card_5.png|x150px]]
}}}