Changes

*Firmware version

*Firmware version

*Last Start Time - last device start time.

*Last Start Time - last device start time.

*RTC Time - real time clock or current device time.

*RTC Time - real-time clock or current device time.

*Power Voltage (mV)

*Power Voltage (mV)

*Device IMEI

*Device IMEI

*Satellites

*Satellites

**Visible -  the amount and type of satellites that are visible.

**Visible -  the amount and type of satellites that are visible.

**In Use - the amount of satellites used for location positioning.

**In Use - the number of satellites used for location positioning.

*Location

*Location

**Latitude/Longitude - shows current device coordinates and if you press them opens '''Object location''' window with map.

**Latitude/Longitude - shows current device coordinates and if you press them opens '''Object location''' window with a map.

**Altitude, Angle

**Altitude, Angle

**HDOP, PDOP

**HDOP, PDOP

**Signal Level

**Signal Level

*GPRS traffic

*GPRS traffic

**Sent Data - the amount of data that has been sent by device.

**Sent Data - the amount of data that has been sent by the device.

**Received Data - the amount of data that has been received by device.

**Received Data - the amount of data that has been received by the device.

**Total Traffic - Sent Data + Received Data

**Total Traffic - Sent Data + Received Data

*Sockets information:

*Sockets information:

**Socket - Closed or Server domain and port which is used when sending AVL Data via TCP/UDP.

**Socket - Closed or Server domain and port which is used when sending AVL Data via TCP/UDP.

*Records

*Records

**Sent Records count - how many records were sent to the server since last data reset.

**Sent Records count - how many records were sent to the server since the last data reset.

**Last Record Send - date and time when the last record was sent.

**Last Record Send - date and time when the last record was sent.

**Last Server Response Time - date and time when the last server response was.

**Last Server Response Time - date and time when the last server response was.

*SMS Count  

*SMS Count  

**Received SMS - the amount of SMS messages device has received.

**Received SMS - the amount of SMS messages the device has received.

**Sent SMS - the amount of SMS responses that were sent from the device.

**Sent SMS - the amount of SMS responses that were sent from the device.

**SMS Count - Received SMS + Sent SMS

**SMS Count - Received SMS + Sent SMS

**Log - after button is pressed, the device starts log capturing for 10 minutes with configuration download. After this time device .log and configuration .cfg will be in compressed archive. <p>Archive name: <code>YYYY_MM_DD_HH_MM_SS_{{{model|FMB1YX}}}_IMEI_Log.zip</code><br>Default directory: <code>C:\Users\<username>\Documents</code></p>

**Log - after button is pressed, the device starts log capturing for 10 minutes with configuration download. After this time device .log and configuration .cfg will be in compressed archive. <p>Archive name: <code>YYYY_MM_DD_HH_MM_SS_{{{model|FMB1YX}}}_IMEI_Log.zip</code><br>Default directory: <code>C:\Users\<username>\Documents</code></p>

[[File:logging.gif]]

[[File:logging.gif]]

**Dump - after button is pressed, the device starts to download .dmp logs and configuration .cfg from device in compressed archive. <p>Archive name: <code>YYYY_MM_DD_HH_MM_SS_{{{model|FMB1YX}}}_IMEI_Dump.zip</code><br>Default directory: <code>C:\Users\<username>\Documents</code><br>Dump files can be read only with special software. If needed, provide these files to your Teltonika sales manager or Teltonika Support team.</p>

:*Dump - after button is pressed, the device starts to download .dmp logs and configuration .cfg from device in compressed archive. <p>Archive name: <code>YYYY_MM_DD_HH_MM_SS_{{{model|FMB1YX}}}_IMEI_Dump.zip</code><br>Default directory: <code>C:\Users\<username>\Documents</code><br>Dump files can be read only with special software. If needed, provide these files to your Teltonika sales manager or Teltonika Support team.</p>

**Open directory - this button appears near '''Log''' or '''Dump''' if one of these functions were used.

:*Open directory - this button appears near '''Log''' or '''Dump''' if one of these functions were used.

*Accelerometer - after button is pressed, the device starts to capture accelerometer values for 1 second.

*Accelerometer - after the button is pressed, the device starts to capture accelerometer values for 1 second.

{{{txt_lls|==LLS Calibration==

{{{txt_lls|==LLS Calibration==

* LLS calibration - in this section you can calculate calibration values of Analog LLS sensors for AVL server - create a polynom which is needed to convert sensor values to liters:

* LLS calibration - in this section you can calculate calibration values of Analog LLS sensors for AVL server - create a polynom which is needed to convert sensor values to liters:

 

**Table is filled row by row. Each row represents one fuel tank fill. To calculate constants it is needed to select a sensor from ''„Available sensors“'', and fill the „Fuel, L.“ column and capture the current value of a sensor by clicking the ''"Refresh"'' button. Then the next value in liters should be entered by the user and so on.  

:::Table is filled row by row. Each row represents one fuel tank fill. To calculate constants it is needed to select a sensor from „Available sensors“, and fill „Fuel, L.“ column and capture current value of a sensor by clicking "Refresh" button. Then the next value in liters should be entered by user and so on.  

**When a table is filled, calculated a0, a1, a2, and a3 values should be seen.

:::When table is filled, calculated a0, a1, a2 and a3 values should be seen.

**To add a new tank fill row click "Add row". To remove the row click the ''"minus"'' button near the row you want to clear. To Clear all the rows click ''"Clear rows"''.

:::To add a new tank fill row click "Add row". To remove the row click "minus" button near the row you want to clear. To Clear all the rows click "Clear rows".

**By clicking ''"Export"'' data will be exported to .csv file.

:::By clicking "Export" data will be exported to .csv file.

**To recalculate the polynom click on ''"Calculate"'' button.

:::To recalculate the polynom click on "Calculate" button.

[[File:LLS_Calibration.png]]

[[File:LLS_Calibration.png]]

{{{txt_obd|==OBD Info==

{{{txt_obd|==OBD Info==

Shows the main OBD parameters with current values when the device is connected to the vehicle via OBDII socket or using [[{{{model|FMB120}}}_Bluetooth_settings#How_to_connect_OBD_II_Bluetooth_Dongle_to_FMB_device|OBDII Bluetooth Dongle]].}}}

Shows the main OBD parameters with current values when the device is connected to the vehicle via OBDII socket or using [[{{{model|FMB120}}}_Bluetooth_settings#How_to_connect_OBD_II_Bluetooth_Dongle_to_FMB_device|OBDII Bluetooth Dongle]].

 

'''Note:''' not all parameters which are displayed in the ''"OBD Info"'' tab can be readable from the vehicle.}}}

 

{{{txt_can|==CAN Adapter Info==  

{{{txt_can|==CAN Adapter Info==  

Shows the parameters with current values (including program number and software version) from CAN {{{FMB140_CAN|adapter when the device is connected to LV-CAN200/ALL-CAN300/CAN-CONTROL.}}} }}}

Shows the parameters with current values (including program number and software version) from CAN {{{FMB140_CAN|adapter when the device is connected to [[LV-CAN200]]/[[ALL-CAN300]]/[[CAN-CONTROL]].}}}

 

'''Note:''' not all parameters which are displayed in the ''"CAN Adapter Info"'' tab can be readable from the vehicle.}}}