Changes

#'''Start vehicle engine'''.

#'''Start vehicle engine'''.

#Send following '''SMS commands''' to FMX1YX device:  

#Send following '''SMS commands''' to FMX1YX device:  

#*If you have set SMS login and password:<code>login pass cpureset</code> -> <code>login pass log2sdfilterset 0;4;1</code>

#*If you have set SMS login and password:<code>login pass log2sdfilterset 0;4;1</code> --> <code>login pass cpureset</code>

#*If SMS login and password are not set leave two spaces before command: <code><span style="color:#f8f9fa">aa</span>cpureset</code> -><code><span style="color:#f8f9fa">aa</span>log2sdfilterset 0;4;1</code><p>If command was sent correctly you should receive SMS Response:<code>Enabled Trace Filters:3</code></p><p>Make sure:</p><p>Filter 0 - turn off all filters</p><p>Filter 4 - turn on CAN adapter filter</p><p>Filter 1 - save installed filters</p>

#*If SMS login and password are not set leave two spaces before command: <code><span style="color:#f8f9fa">aa</span>log2sdfilterset 0;4;1</code> --> <code><span style="color:#f8f9fa">aa</span>cpureset</code><p>If command was sent correctly you should receive SMS Response:<code>Enabled Trace Filters:3</code></p><p>Make sure:</p><p>Filter 0 - turn off all filters</p><p>Filter 4 - turn on CAN adapter filter</p><p>Filter 1 - save installed filters</p>

#After the SMS response message CAN adapter log capturing has been started.

#After the SMS response message CAN adapter log capturing has been started.

#Wait at least '''5 minutes''' to get enough CAN bus data and '''turn off''' vehicle engine.

#Wait at least '''5 minutes''' to get enough CAN bus data and '''turn off''' vehicle engine.