1,583
edits
Changes
Upgrading CAN-CONTROL to CAN-CONTROl+Immobilizer (view source)
Revision as of 17:13, 14 January 2021
, 17:13, 14 January 2021no edit summary
Upgrading CAN-CONTROL to CAN-CONTROl+Immobilizer
Upgrading CAN-CONTROL to CAN-CONTROl+Immobilizer
<br>
Possible problems:
Possible problems:
<br>
1. Doors Lock/Unlock is not working.
1. Doors Lock/Unlock is not working.<br>
2. Doors Lock/Unlock works but engine blocking and unblock does not. Most of times response will be: CMD not supported. In some situations engine block will work but unblocking will not.
2. Doors Lock/Unlock works but engine blocking and unblock does not. Most of times response will be: CMD not supported. In some situations engine block will work but unblocking will not.<br>
<br>
After installation is done and program number is set please do learning procedure.
After installation is done and program number is set please do learning procedure.
<br>
1. send lvcansetprog 11120 (Or any other)
1. send lvcansetprog 11120 (Or any other) <br>
2. send lvcansetprog (one that is for your car model)
2. send lvcansetprog (one that is for your car model)<br>
3. After you will receive response please do learning with key locking/unlocking 3 times. lock>unlock;lock>unlock;lock>unlock;
3. After you will receive response please do learning with key locking/unlocking 3 times. lock>unlock;lock>unlock;lock>unlock;
<br>
Now you can try commands to open and close doors.<br>
Now you can try commands to block and unblock engine.<br>
<br>
All sms/gprs responces should inform you that command has been completed succesffully.<br>
Note: If installing CAN-CONTROL adapter into different vehicle learning must be initiated. If adapter will be installed back on previous car model learning step must be repeated.<br>
Note: If installing CAN-CONTROL adapter into different vehicle learning must be initiated. If adapter will be installed back on previous car model learning step must be repeated.