6,023
edits
Changes
mLine 113:
Line 113: − +
no edit summary
# Gently open ECAN01 cover using plastic pry tool from both sides
# Gently open ECAN01 cover using plastic pry tool from both sides
# Insert CAN wires as shown in figure 5. Please make sure that correct slots are used (CAN High/CAN Low)
# Insert CAN wires as shown in figure 2. Please make sure that correct slots are used (CAN High/CAN Low)
# Gently close the device.
# Gently close the device.
# Device is ready-to-use.
# Device is ready-to-use.