1,069
edits
Changes
Template:FMB Features settings (view source)
Revision as of 10:06, 17 August 2021
, 10:06, 17 August 2021no edit summary
{{{dout_type|
{{{dout_type|
==DOUT 1 Output Type==
==DOUT 1 Output Type==
[[File:Dout1 output type.gif|right]] '''DOUT 1 Output Type''' functionality sets the initial ''DOUT1'' state. If functionality is configured in ''Normal'' mode digital output inactive state is low - 0 and when it is controlled by any scenario digital output is set to high - 1 state. Whenever functionality is configured in ''Inverted'' mode digital output inactive state is high - 1 and when it is controlled by any scenario digital output is set to low - 0 state.
[[File:Dout1 output type.gif|right]] '''DOUT 1 Output Type''' functionality sets the initial ''DOUT1'' state. If functionality is configured in ''Normal'' mode digital output inactive state is low and when it is controlled by any scenario digital output is set to high state. Whenever functionality is configured in ''Inverted'' mode digital output inactive state is high and when it is controlled by any scenario digital output is set to low state.
*'''<u>Notice!</u>''' Digital output type control functionality will not affect SMS/GPRS command '''setdigout''' execution.
*'''<u>Notice!</u>''' Digital output type control functionality will not affect SMS/GPRS command '''setdigout''' execution. <br></br>
[[File:Alert.png|50px]] <b>Available from Firmware version: [[ {{{model|}}}_firmware_errata|3.27.07.Rev.0 ]] </b>
}}}
}}}