1,069
edits
Changes
Template:FMB Features settings (view source)
Revision as of 10:19, 17 August 2021
, 10:19, 17 August 2021no edit summary
==Over Speeding==
==Over Speeding==
When vehicle speed exceeds configured maximum speed value the scenario is activated, an event record is generated{{{text_dout| and digital output status is changed to 1 when configured}}}.<br />Scenario is active until detected speed decreases below the set parameter value.
When vehicle speed exceeds configured maximum speed value the scenario is activated, an event record is generated{{{text_dout| and digital output status is changed to 1 when configured}}}.<br />Scenario is active until detected speed decreases below the set parameter value. Configurable parameters:
[[Image:Over_Speeding.gif|{{{general|size}}}|right]] <br /><br /><br /><br />
[[Image:Over_Speeding.gif|{{{general|size}}}|right]]
<br />
<br /><br />
*Scenario settings – defines priority of over speeding scenario: 0 – disabled, 1 – low, 2 – high, 3 – panic.
<br /><br />
*Max speed – it is max allowed speed which can be reached. If speed exceeded configured value, then event will occur.
<br /><br />
*Output control – available scenario settings for module Digital output activation/deactivation
*DOUT ON/OFF duration – a value in seconds, for how long DOUT/DOUT2 should be active or inactive.
*Send SMS to – GSM number to which SMS event will be sent.
*SMS text – SMS text.
<br /><br /><br /><br /><br />
{{{jamming1|
{{{jamming1|
==Jamming==
==Jamming==
[[Image:Jamming.gif|{{{general|size}}}|right]]
[[Image:Jamming.gif|{{{general|size}}}|right]]
[[Image:GNSS_Fuel_Counter.gif|{{{general|size}}}|right]]
[[Image:GNSS_Fuel_Counter.gif|{{{general|size}}}|right]]
To configure ''Fuel Counter'' parameters use fuel consumption norms which are presented in the technical documentation of the vehicle. By default speeds for these fuel consumption norms are: City – 30 km/h, Average - 60 km/h, Highway - 90 km/h. These values can be changed.
When speed is higher than the highway fuel consumption speed, x% of highway fuel consumption is added every extra y km/h, by default [[{{{model|FMB1YX}}}]] adds 20% every 50 km/h of extra speed. For example, the fuel consumption is (1.2 * (Highway Fuel Consumption)) at 140 km/h and (1.4 * (Highway Fuel Consumption)) at 190 km/h.
''Correction coefficient'' is used to correct every value of fuel consumption which is sent to the server through an expression of ((Used Fuel) * ''Correction coefficient''). By default, it is 1, with minimum and maximum values of accordingly 0.01 and 2. For example, when the correction coefficient is 1 and [[{{{model|FMB1YX}}}]] calculates that the amount of used fuel over 35 m distance is 20 ml, the value of 20 ml will be sent to the server, and if correction coefficient is 1.2, the value of 20 * 1.2 = 24 ml will be sent to the server.
''Fuel Consumption on Idling'' is used to calculate fuel consumption when the ignition is on, but the vehicle is stationary. The consumption value is 1 l/h by default, with a minimum and maximum of accordingly 0 and 5 l/h. This parameter is less than 1.0 l/h for almost all diesel cars and is equal to about 1.5 – 2.0 l/h for gasoline cars.
}}}
}}}
{{{dout_control_via_ignition_feature|==DOUT Control Via Ignition==
{{{dout_control_via_ignition_feature|==DOUT Control Via Ignition==
