1,663
edits
Changes
→FM Tracker Configuration
# In [[FMB120 Bluetooth settings|Bluetooth]] settings Enable Bluetooth, set this setting as either "Enable (hidden)" or "Enable (visible)", otherwise Bluetooth will be disabled;
# In [[FMB120 Bluetooth settings|Bluetooth]] settings Enable Bluetooth, set this setting as either "Enable (hidden)" or "Enable (visible)", otherwise Bluetooth will be disabled;
# In [[FMB120 Bluetooth 4.0 settings|Bluetooth 4.0]] settings:
# In [[FMB120 Bluetooth 4.0 settings|Bluetooth 4.0]] settings:
## set Non Stop Scan to "Disable", configure "Update Frequency" and "Scan duration" as 30 seconds. These settings will bring the best results for BLE scanning with our device;
## set Non Stop Scan to "Disable", configure "Update Frequency" and "Scan duration" as 30 seconds. These settings will bring the best results for BLE scanning with our device;
## In [[FMB120 Bluetooth 4.0 settings#Advanced%20Mode|Bluetooth 4.0 settings Advanced Mode Settings]] Load EYE Sensor preset according to the set Eye Sensor protocol set in EYE App -> Basic Settings -> Packet settings.
## In [[FMB120 Bluetooth 4.0 settings#Advanced%20Mode|Bluetooth 4.0 settings Advanced Mode Settings]] Load EYE Sensor preset according to the set Eye Sensor protocol set in [[EYE SENSOR / BTSMP1#Configure%20window|EYE App Basic Configuration window]]
## Configure MAC address of the sensor
## Configure MAC address of the sensor
# Make sure that name of the sensor is default length (10 symbols) in EYE App -> Basic Settings tab
# Make sure that name of the sensor is default length (10 symbols) in [[EYE SENSOR / BTSMP1#Configure%20window|EYE App Basic Configuration window]]
If you do not have preset you can download them from below table:
If you do not have preset you can download them from below table: