Changes

# In [[FMB120 Bluetooth settings|Bluetooth]] settings Enable Bluetooth, set this setting as either "Enable (hidden)" or "Enable (visible)", otherwise Bluetooth will be disabled;

# In [[FMB120 Bluetooth settings|Bluetooth]] settings Enable Bluetooth, set this setting as either "Enable (hidden)" or "Enable (visible)", otherwise Bluetooth will be disabled;

# In [[FMB120 Bluetooth 4.0 settings|Bluetooth 4.0]] settings:

# In [[FMB120 Bluetooth 4.0 settings|Bluetooth 4.0]] settings:

## set Non Stop Scan to "Disable", configure "Update Frequency" and "Scan duration" as 30 seconds. These settings will bring the best results for BLE scanning with our device;  

## set Non Stop Scan to "Disable", configure "Update Frequency" and "Scan duration" as 30 seconds. These settings will bring the best results for BLE scanning with our device;

## In [[FMB120 Bluetooth 4.0 settings#Advanced%20Mode|Bluetooth 4.0 settings Advanced Mode Settings]] Load EYE Sensor preset according to the set Eye Sensor protocol set in EYE App -> Basic Settings -> Packet settings.

## In [[FMB120 Bluetooth 4.0 settings#Advanced%20Mode|Bluetooth 4.0 settings Advanced Mode Settings]] Load EYE Sensor preset according to the set Eye Sensor protocol set in [[EYE SENSOR / BTSMP1#Configure%20window|EYE App Basic Configuration window]]

## Configure MAC address of the sensor   

## Configure MAC address of the sensor   

# Make sure that name of the sensor is default length (10 symbols) in EYE App -> Basic Settings tab

# Make sure that name of the sensor is default length (10 symbols) in [[EYE SENSOR / BTSMP1#Configure%20window|EYE App Basic Configuration window]]

If you do not have preset you can download them from below table:

If you do not have preset you can download them from below table: