0
edits
Changes
no edit summary
* NOTE: Before you connect or start calibration, please install RNDIS driver first.
* NOTE: Before you connect or start calibration, please install RNDIS driver first.
Calibration Setup
Calibration Setup
* Access MDSM-22 Calibration page via PC
* Access DSM Calibration page via PC
** Connect MDSM-22 to PC using Micro USB cable with 5 pins.
** Connect DSM to PC using Micro USB cable with 5 pins.
** Power on MDSM-22. If you hear repeated beep sound, this means MDSM-22 is properly connected to computer.
** Power on DSM. If you hear repeated beep sound, this means DSM is properly connected to computer.
** Activate the browser and enter into http://20.0.0.1:18087/ to access MDSM-22 calibration page. Google Chrome is recommended.
** Activate the browser and enter into http://20.0.0.1:18087/ to access DSM calibration page. Google Chrome is recommended.
** If you see the page below, please select language you want and sign in using following information
** If you see the page below, please select language you want and sign in using following information
‐ ID: admin ‐ Password: 1234
‐ ID: admin ‐ Password: 1234
Calibration
Calibration
* Select Speed Type
* Select Speed Type
** GPS Speed setting - GPS antenna is embedded on MDSM-22. If GPS work correctly, detected is shown. If GPS doesn’t work for 5 mins, Fail is shown.
** GPS Speed setting - GPS antenna is embedded on DSM. If GPS work correctly, detected is shown. If GPS doesn’t work for 5 mins, Fail is shown.