Changes

* NOTE: Before you connect or start calibration, please install RNDIS driver first.

* NOTE: Before you connect or start calibration, please install RNDIS driver first.

Calibration Setup

Calibration Setup

* Access MDSM-22 Calibration page via PC

* Access DSM Calibration page via PC

** Connect MDSM-22 to PC using Micro USB cable with 5 pins.

** Connect DSM to PC using Micro USB cable with 5 pins.

** Power on MDSM-22. If you hear repeated beep sound, this means MDSM-22 is properly connected to computer.

** Power on DSM. If you hear repeated beep sound, this means DSM is properly connected to computer.

** Activate the browser and enter into http://20.0.0.1:18087/ to access MDSM-22 calibration page. Google Chrome is recommended.

** Activate the browser and enter into http://20.0.0.1:18087/ to access DSM calibration page. Google Chrome is recommended.

** If you see the page below, please select language you want and sign in using following information

** If you see the page below, please select language you want and sign in using following information

   ‐ ID: admin ‐ Password: 1234

   ‐ ID: admin ‐ Password: 1234

Calibration

Calibration

* Select Speed Type

* Select Speed Type

** GPS Speed setting - GPS antenna is embedded on MDSM-22. If GPS work correctly, detected is shown. If GPS doesn’t work for 5 mins, Fail is shown.

** GPS Speed setting - GPS antenna is embedded on DSM. If GPS work correctly, detected is shown. If GPS doesn’t work for 5 mins, Fail is shown.