Changes

Line 3: Line 3:  
===FMB Firmware implementation on FMC125===
 
===FMB Firmware implementation on FMC125===
   −
In order to enable Iridium support on FMB, first it is necessary to enable RS232 support and select “satellite backup” mode. Correct configuration is shown in the picture below.
+
In order to enable Iridium support on FMB, first it is necessary to enable RS232 support and select “satellite backup” mode. This is available from '''FW''' '''03.28.04.Rev.104'''
 +
 
 +
Correct configuration is shown in the picture below.
    
[[File:Iridium rs232 parameter config.png|center|500x500 px]]
 
[[File:Iridium rs232 parameter config.png|center|500x500 px]]
Line 24: Line 26:  
===FMB Firmware configuration on FMX640/FMX641 devices===
 
===FMB Firmware configuration on FMX640/FMX641 devices===
   −
FMX640 can be setup with Iridium Edge by activating RS232 short burst data parameters, this can be done visiting this tutorial [https://wiki.teltonika-gps.com/view/FMB641_Short_Burst_Data Here].
+
FMX640 can be setup with Iridium Edge by activating RS232 short burst data parameters, this is available from '''FW''' '''01.02.18.Rev.00'''. It can be done visiting this tutorial [https://wiki.teltonika-gps.com/view/FMB641_Short_Burst_Data Here].  
    
[[File:FMX640 and RS232 illustration v1.2.png|900x400px]]
 
[[File:FMX640 and RS232 illustration v1.2.png|900x400px]]
0

edits